View Full Version : Forum Speed


JohnR
12-09-2003, 12:31 PM
My home interent service is running pretty slow so I can't tell properly how the board is running. Does it seem slower? Faster? The same?

Thanks

Jimbo
12-09-2003, 12:33 PM
John, I'm running thru the corporate internet here at work, but it's smokin' like usual. Not seeing any delays.

rwilhelm
12-09-2003, 12:36 PM
Seems to be running fast like usual using DSL at work.

chris L
12-09-2003, 12:36 PM
looking fine to me . same same

Slipknot
12-09-2003, 01:12 PM
A little slower here on cable hookup

Karl F
12-09-2003, 01:26 PM
I gotta second what Slip said, seems slower on the comcast today, than usual.

179
12-09-2003, 01:37 PM
John,
It seems the same here....no problems at all.

Saltheart
12-09-2003, 02:36 PM
Good here

HESH2
12-09-2003, 02:38 PM
GOOD HERE ON PHONE LINE

The Dad Fisherman
12-09-2003, 03:22 PM
I seem to be experiencing a Packet latency rate of 2.467 +/- 200msec on all packets with a frame size <500kb above the Optimal range of 1.44mbps





Actually it seems Fine...no problems here

fishaholic18
12-09-2003, 03:31 PM
Fast as usual for me on dial up.

UserRemoved1
12-09-2003, 03:32 PM
I think the gidifrickulating widgalump is out of tweak?

Moose Nuckle
12-09-2003, 03:35 PM
My Gleeping Glepor is a full speed. No Problems!

JohnR
12-09-2003, 03:38 PM
A "framastatic gasket" ....

UserRemoved1
12-09-2003, 03:40 PM
that's PART of the assembly :laughs:

Originally posted by JohnR
A "framastatic gasket" ....

JohnR
12-09-2003, 03:44 PM
Salty - I forgot to tell you that when I was at your house a month ago, I thought I saw bumper fluid leaking from the finnegan pin on the Quig

Christian
12-09-2003, 03:45 PM
fast

UserRemoved1
12-09-2003, 03:54 PM
yea must be that damn brick wall that got in the way when I was backing up....effer cost me $500 to replace..... :af: :af:

I did top off the fluid though don't seem to be leakin now....


Originally posted by JohnR
Salty - I forgot to tell you that when I was at your house a month ago, I thought I saw bumper fluid leaking from the finnegan pin on the Quig

macojoe
12-10-2003, 12:12 AM
seems to be about the same it has always been here! I have comcast