I have done a search, but, I have a question. Does anyone make a jig for thru-drilling on a drill press. I get frustrated when I spend all the time turning and sanding and all that just to mess up the thru drilling. I would buy one if I could find one. I think where I mess up most of the time is finding the center, not the drilling part. Can anyone help please......Jay

Do a search on 'dowel center' on the plug building forum and you shoudl find what you need....

http://woodworker.com/cgi-bin/search.exe?search=center%20finder&go=636

Yes, that is frustrating. I usually through drill on my lathe, it works real well. And if its a center drilled hole I'll drill before turning. I rarely have a problem, cept when I rush. Try using the lathe as a drill press, it works for eyes and belly holes as well.:D

OK....Thanks guys....I'm just going to buy one...Thanks Again, Jay

If you check out the christmas step by step I did (in the above forum) I posted a photo of a center finder that is pretty easy to make. In the popper how to, I show a jig that can also be used to center drill on the press.

Jigman

Go to packardwoodworks.com and look at the veritas center marker. Worth every penny

Thanks...Mac, that is exactly what I want. I already ordered a different one from grizzly, but I might order that one too, that one is much better.