Can you thin the epoxy somehow to get it to go on in a lighter coat?
I think it goes on way to thick no mater what I do.

Thanx

Are you using e-tex lite?:confused: Can't get much thinner than that in an epoxy.;)

Try a drop of acetone.....but just a drop. i put to much in once and it started accelerating almost instantaneously.....cup got real hot too from the reaction

You can also try warming your mixed epoxy.

Bernzy

Originally posted by Bernzy
You can also try warming your mixed epoxy.

Bernzy

I read somewhere that you can put the cup your mixing in, into another cotainer of warm water to surround it with heat.

Yup!

I always thin my epoxy to make it flow. I use a product called epoxy reducer, made for spraying. I used to epoxy spray swimming pools, used 1 qt reducer to 1 gal of epoxy. I used to buy it by the case from a company called Seamco in Florida. I'm sure you can find a similar product available for the hobbyist.
In fact I think I saw epoxy reducer in one of the catalogs, maybe Moore's Lures.
Good Luck:D

Thanks everyone, ;)