|
View Full Version : sealing plugs dannyplug1 03-09-2005, 01:15 PM I am ready to seal my plugs. In on the water they say use a 60 40 mix of linseed oil to thinner for sealing. Unfortunatly they dont say if its boiled linseed or raw linseed any one out there who could tell me which one? thanks chuckie MAC 03-09-2005, 01:18 PM boiled FlukinUki 03-10-2005, 08:02 AM Make sure you dont leave the rags laying around!!! There is a VERY HIGH risk the rags will spontaniously combust. You dont want this to happen. BE CAREFUL and read all warnimg labels. Someone on another site had a very close call when his rags almost burst into flames. zacs 03-10-2005, 08:45 AM so what do you do with the rags? Bernzy 03-10-2005, 08:48 AM Get an empty gallon paint can and put the used rags in there, then dowse with water. BOTTLE POP 03-10-2005, 11:08 AM how do you know when the linseed oil is dry? Pete F. 03-10-2005, 03:17 PM That is the 64,000$ question. I think a week is safe, however I usually only have 3 days of patience. Sometimes it causes a problem.:smash: vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.
|