PDA

View Full Version : Drill chuck--

justplugit
05-10-2005, 05:24 PM
Has anyone found a driil chuck that will fit the tailstock of a Jet Mini?
Thanks.
MAC
05-10-2005, 05:28 PM
Go to WTTools.com You want one with a #2 MT About 10 bux for the chuck and taper adapter
fishaholic18
05-10-2005, 05:28 PM
http://www.pennstateind.com/
or Ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3875225399&category=25292
Tagger
05-10-2005, 06:38 PM
I just ordered one of these sears lathe takes #1 morse taper ..my delta takes #2...http://www.packardwoodworks.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=111012&Category_Code=
justplugit
05-10-2005, 07:11 PM
Geez thanks guys:hihi: I got more info from you in 2 hours then i got in 2 days calling the company:D Should have come to "the source" in the first place.:)
Jigman
05-10-2005, 09:10 PM
The MT2 can be used in the head or tail stock of the Jet.

Jigman
gone fishin
05-10-2005, 09:12 PM
Go to sears and bucks -- they have the chuck with a # 2 taper that will fit. I actually have two and sometimes use the second one in my tailstock to salvage plugs that I have cut the end off prematurely. A 1/8 " drill chucked up and fit into the hole acts as a center even with cupped plugs and I can drill or finish as I need to. :jump: :jump:
Charleston
05-11-2005, 09:04 AM
The MT2 can be used in the head or tail stock of the Jet.

Jigman

Most important info yet!!! :kewl:
justplugit
05-11-2005, 07:09 PM
Thanks for all the good info.:btu: