I have a LARGE quantity of 1x1x10" soft maple squares that I cannot use due to a change in how I make these lures now. Most are drilled for a belly weight at about the 6" mark so either use them as is or use the 6" piece to make stubbies etc or fill the hole.

Wood is free...shipping is not. You pay ups shipping to where ever. No commercial builders, for private use only...

Since there is so much and I have minimal time to do this, shipping etc will be on a "as I have time" basis. Pickups can be arranged...I can throw the stuff in a box and leave it outside somewhere.

First person that emails me and says they want 200 pieces I throw it all in the dumpster...I'm only doing this to help you guys out with the hobby not to put money in someones pocket. The more the merrier.

Email me your address etc to scott@#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&.com and I will get back to you with the shipping total as time permits.

Can I take some of the blanks off your Hands so I'll have some
wood to practice with when I get my new lathe.

Thanks
Joe

Guys that email please give me an idea of how many pieces you want. I should have said this earlier. There's plenty to go around.

i want 50 :thanks:

freak send me a email so I can print it out and bring down there. I'm going to put everything together sometime this week.

Scott email sent via the link on your page
Bryan

got it Bryan you're all set.

Ok VB asked for 200 pieces so it all goes in the dumpster....just kidding :D Theres 17 guys now so I'm going to hold it there until I get a handle on how much if any is left.

scott, i'll take some if you got any left after you're done with your figuring and boxing. pm me to let me know if you want. i'm planning on getting a jet mini next week. the learning curve at this point looks like a wall....

Salty;
If it looks like guys will be left out, you can cross me off the list to give them some wood....

Scott I'll take some if there is any left!:grins:

Let me get some time this week to box the stuff and see what's left, I'll let you guys know. There is alot there. I had predrilled this stuff for weight holes but have completely changed how these are done now, and will never go back to the old way so it's all excess at this point.

Ok everything is boxed and there was enough for 2 more guys who have been emailed for their addresses. I basically put about 50 pc in each box. There was a mix of soft maple and mixed birch in there so some guys got some of each, or one or the other. Ups amounts are in the boxes. The most expensive one was that piggy guy in NJ at $10.94 :D Bill no way you would have wanted $20 worth that's alot of wood and this will keep ya busy for the next few months :D

VB I should be at the shop this Saturday pending what happens at the Doc on Friday. I think I gave you the tel # there.

All others sorry, Sometime there will be more so if and when it happens remind me you missed out this time and I'll make sure you're at the top of the list next time.

The ups guy is gonna hate me tomorrow. There's over 300 lbs of wood there :D

Scott I'll take some if there is any left!:grins:


Don,
you can have 1/2 of mine.
i only need 23 of them:)

no he can't I saved you the logs http://www.striped-bass.com/Stripertalk/images/smilies/bootyshake.gif Pretty bad when you have to cut and paste the smilies

i'll try for this sat.

lock your dumpster.
and the paint cabinet.:bshake:


my smiles work "most pisssa" as they say:bshake:

lol i'm coverin the machines too. I will be there all day.

Hey Salty, not writing to ask for wood. Just writing to say thanks for being such a good guy and so willing to share with others. Not just materials, but all the advice you give. I'm not much of a poster here, but I lurk alot, and it always impresses me how much you help others. I wish you well !
Valentine

Thanks Valentine always happy to help guys out where I can!

Rec'd my wood yestereday!!! WOOHOOO. Thanks Salty, you are the man. Sent shipping$ via paypal.

thanks again

Zac

Enjoy Zacs, post some pics of what you make

Did I miss the wood giveaway ? If I'm not too late I'd be interested in some. That's very nice of you...

MM see post #13 above

piggy guy in NJ!!?? :laugha:

:rotf2: Hi Bill just havin fun with you. Enjoy. Stuff will make great needles.

piggy guy in NJ!!?? :laugha:

Anytime my friend. When I said 20bux worth I was only trying to make it worth your time.
Thanks is advance!!

yea I know I laughed when I filled that box, that was the biggest one that went out and it was only like $10 something I said wow no way $20 you wouldn't be able to lift the box :D

Steelhead thank you.

VB I'll be there all weekend again. Call so I know you're coming.

ohh man !!!
i got my box today :jump1:

thanks scott:D

Mine's here, payment sent! Thanks Scott.
Now I think I'll make 84 little spooks :)

Thanks Bill and enjoy. Nice stuff to turn.

yous guys are killing me with this thread. everytime I see a new post I'm thinking to myself "gee, maybe scott has some left:huh: "

oh well.
Very nice of you to do that Scott:btu:
you're a true gentleman

There will be more sometime jnski. If you want birch or maple turning squares email me and I can send you a list of what I got. MUCHO cheaper than buying it at a lumberyard even with ups. I can optionally through drill them on my machine for you for cheap dough additional if you want also.

Thanks Scott. Email sent

I can optionally through drill them on my machine

HELLO ??
why NO i get thru drilled blank squares?
you know i cordless drill with 50% success ratio::fishslap:

You didn't ask for that option Freak :tooth:

I showed you how to do it.

Just got home from a trip to find a box of wood. Perfect welcome home. Thanks again Scott, I'll get some money in the mail.

no problem no rush Kris, that must have been a cool trip.