All you guys that have been bugging me to find the catalog for the popper mouth balls, you can thank Prof Moriarty for bugging me more than anybody and making me go dig through the stack. Murphys law always says a catalog you need is on the bottom or real close to it in the stack :)

What we had talked about before was to do a group buy on these. Sizes they have are 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 1, 1 1/4. I will check prices on them again, this catalog is 2 years old and the most expensive one was 21.36 for the 1.25 size.

I had originally bought a bunch of the 1.25 size and them things been pisser this is how I cup all my poppers now with jigs. Done thousands on these now and they're still wicked sharp. 1/4" shank so it fits in a drill press perfect.

You guys that wanted them reply here with # and sizes you want and I'll call these guys on Monday and get a price from them for a quantity buy.

(1) at 1-1/4" please

thanks

and thanks paul

Salty,

(1) at 1 1/4 also please.

Thanks again!

1 @ 1 1/4" pleeze
thanks

1 @ 1 1/4 thanks

I'll take one @ 1 1/4"

No thanks Scott I don't want them now. :huh:

Just kidding. The squeaky wheel gets the grease:wave: I will take 1 piece at 1.25 dia. and 1 piece at 1.00 dia. Thanks Scott that 2 fluted 1.25 dia. ball endmill I was using was getting way to dangerous. Paul

Absolutely Paul I should have dug that out a long time ago. I'll get back to you guys on Monday with the price of everything.

Salty,

I'll take one of the 1.25.

Thanks,

Kevin

I'm sorry , but are you talking about ball rasps ? :huh:
If so , I could use some more . :boots:
Ball rasps ?

I will take 1 at 3/4", 1 at 1" and 1 at 1 1/4 " Thanks!

I'll take one at 1 1/4 pleze! :D

I'll take one at 1" and possibly one at 3/4"

0.75, 1.0, and 1.25, one of each please.

i'll take a 1 1/4 scott. thanks

SCOTT,
1.25, AND 1.O. ONE EACH, PLS. APPRECIATE YOU DOING THE SCUT WORK FOR ALL OF US, AS WELL AS LOOKING INTO THE QUANTY BUY.
MUCH GRATS,

BASSBUDDA

(1) at 1 1/4 also please.

One at 1 1/4 please. Thanks!

One of the 1 1/4 please... Thanks Scott.

1 of 1.25, and 1 of 1.0, Thank you

I'll take the same as Charleston "1 at 3/4" "1 at 1." and "1 at 1 1/4"and thank you

I have a selection of ball rasps now that I got online for short money. I put the ball rasp in the drill chuck in my headstock, slow the spindle way down and cup the poppers by hand.

That's why all you guys that have my poppers should know they are made with tender loving care, :)

:btu: Charleston poppers (engineered to catch fish).

1 at 1 1/4 for me thanks salty

1 at 3/4
1 at 1

I called today and got floored. Guy said individual pieces were now 50.55 each and if we did qty he said $38.50 each. I told him to sharpen his pencil and check firm prices and call me back with leadtime and with the prices on each size. If he don't call me by Wednesday I'm calling him back. I think he'll do better I told him roughly 25 pieces of the 1.25 size so lets see what he comes up with.

The price from Fulton Tool where I bought my ball rasps for the 1.250 dia. is $29.75.

I had a feeling they were going to be more expensive. Cutting tools in general have gotten more expensive. I was using a 2 fluted 1.25 ball end mill and it was getting dangerous so I looked in the cat. for a 4 fluted one. 200 plus bucks, maybe I can convince my boss he needs to have one in stock:rolleyes: I don't care either way I need em. Paul

What is the exact name of that tool....maybe an internet search is in order :D

I don't want to butt in here but I had talked to the guys at Fulton tool about a volume buy. He said to give him some numbers!

Paul, these tools are actualy ball rasps. At a slow spindle spped they will cut a class smooth cup in cedar. I plunge the area with a forstner bit to rough it out than plunge it with the ball rasp. Then I will wlak the plug around the cutter for an offsett sut to allow me to do a cup laerger than the dia. of the rasp. They are rally a MUST HAVE tool in the plug shop.

Sounds perfect and safe

I thought the Ball rasp had a rougher surface more for gouging out rough. These looked more like a larger version of an engraving tool for Dremels. I thought they were called something like a Burr

Just found these but they don't come in anything larger than 3/4"

Carbide Burrs (http://www.american-carbide.com/Burs/ACB.aspx)

They are about the same as a Burr. I have always refered to them as burrs when working in a metal shop.
I think the term ball rasp is correct in the wood working shop. I may be wrong.
I have a link but I do not know how to post it!

Sorry!! The website is calling them Rotary Files!!

Scott,
I'll take one at 1.25 .
Thanks for taking this project.

Charleston that is exactly what they are. The guy called me back today, From these guys the 1.25 is $37.25, the 3/4 and 1" are same price at $25.10 ea. They would be here first week of January.
I think this price is about borderline, I've seen some for many more $$ but seen some cheaper too. I know the quality is good on these and they run true which is a tough thing to do with these things so I'm happy with the price myself. The prices I got were for 25 of each size, the 1.25 size is going to be no problem but the smaller ones we will not make 25 of each so the price will be slightly higher.

I will leave it up to you guys what you want to do.

I can/will order them and can probably get flat rate boxes from usps to ship these. If I do this though I need to collect everyone's checks or whatever, I don't want to get stiffed for an extra 10 pieces etc.

i'll take a 3/4 as well as the 1 1/4 i already spoke for scott. it seems like a fair price. if you think the tooling is good that's good enough for me.

1.25 if there's any left ..

1.25 if there's any left ..
Me too .

SALTY,

HOPE I'M STILL ON THE LIST FOR THE 1.25.

THE CHECK IS WRITTEN, EXCEPT FOR THE FINAL NUMBERS.

WHAT'S THE BOTTOM LINE FOR THE 1.25 AND DOES THAT INCLUDE SHIPPING?

WHO'S THE CHECK MADE OUT TO AND WHERE DO I SEND IT?


TKS FOR HELP'IN US OUT & MERRY CHRISTMAS

GW:thanks: :thanks:

i'm still in. i can pay-pal you if you want.
post on the other site too... probly get a few more guys to sign up.
thanks scott.

I'm out! Thanks anyway.

I'm still in for one 1 1/4. Thanks.

I'm still interested in 1 each .75, 1.0, 1.25. Thanks.

Scott,
Just let me know what you need for a final figure on the 1.25.
I'll send a check asap.
Pete

Ok we just got the 25 pieces on the 1.25 so that's all set, I count 7 total for the 1" and 6 total for the 3/4". I'm gonna see if I can beat him up to give me the better price on the others too if I can.

I will get everything together this week and will post a page for paying/postage etc. I will hit the post office for the flat rate boxes I think that's probably the best way to send them all.

Let me know what i owe and if its possible to pay thru paypal.

Scott, let me know how U want the $$$
Paypal, check, MO, or whatever is good.

I would like to get one 3/4 " if I can still get in on the deal.

I would also need to know where to send payment.

Thank you very much for doing the research and leg work on these.

Eric.

I'm still in for the 1.25 let me know how you want the money and the total.

I'm still in for the 1.25.
Ditto on final cost and shipping.
Thanks Salty!!!!

I'm out ,sorry .

I meant too say i'm out if its not to late if it is then send me the bill .

1 @ 1" pleeze

I'm still in for the 1 at 1" please....gonna pass on the 3/4 inch

Scott,

PM me a contact number so we can work our payment details. I have to ask you about a few other things.

If it's not too late, I'd be grateful to get in on this. I need 1 of each, 0.75, 1.00 and 1.25. Mine are making more smoke than sawdust these days.
Much Thanks

I'll finalize this sometime this week guys, been wicked busy.

Hey, it's only the Holidays...
:-)

Ok order is getting finished this week and I've got the USPS boxes on the way. Payment details at:

http://www.#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&.com/ballrasp.htm

Vic I missed your message before you can call me at home 5082787128

Order placed. Good to go :happy:

order placed.... with some other stuff..

nice banner add :hihi:

Thanks Scott. So the total for a 1.00 and a 1.25 plus shipping and insurance will be a grand total of 72.05. Is that what you want me to enter for the total that I will send you via Visa on your site? Paul

Correct Paul

Payment made for one at 1.25. Thanks! :walk:

Order placed: 1 of each, 0.75", 1.00", 1.25" Thanks again

Just sent in order for 1.0 and 1.25............thanks Scott

Just sent money via Paypal for 1.25 with tax, shipping and ins. Thanks Scott :thanks:

Payment made ... 1 )))) 1.25 ,,,thanks Scott

Order Placed. Thanks Salty!!

Bob

Order placed for one 1.25 .
Thanks .

order placed

Order placed. Thanks for doing this.