I paid attention ,,, gearing up .. just gotta make a vice block ,, Thanks for sparking new intterest George ..

Dam i missed that lesson i was too busy oogling plugs and bs'ing.
Tagger were did you get the spoke shaves?

Taggers on the lose. I have this feeling it wont take you long to figure out the handcarved.

http://roseantiquetools.com/store/page32.html

http://collectibles.search-desc.ebay.com/spoke-shave_Tools-Hardware-Locks_W0QQcatrefZC6QQcoactionZcompareQQcoentrypage ZsearchQQcopagenumZ1QQfromZR2QQfsooZ1QQfsopZ1QQftr tZ1QQftrvZ1QQftsZ2QQsacatZ13849QQsbrsrtZd

I got one from each a flat and a round .. I found the Rose tool place last or I think I would have bought both from them ... brand spanking .(sharp). I 'm not a collector of antique tools ..

Hmmm, this must be how Dr Frankenstien felt.

Thanks for sparking new intterest George ..

Oh man, there he goes, out of control again. :hihi: :btu:

http://roseantiquetools.com/store/page32.html

http://collectibles.search-desc.ebay.com/spoke-shave_Tools-Hardware-Locks_W0QQcatrefZC6QQcoactionZcompareQQcoentrypage ZsearchQQcopagenumZ1QQfromZR2QQfsooZ1QQfsopZ1QQftr tZ1QQftrvZ1QQftsZ2QQsacatZ13849QQsbrsrtZd

I got one from each a flat and a round .. I found the Rose tool place last or I think I would have bought both from them ... brand spanking .(sharp). I 'm not a collector of antique tools ..





Thanks i think i'll be getting some i have to take the dive into handcarves looks like my addiction is growing and growing.:jump:

If all else fails, at least you'll be ready for the return of the Conestogas, when ol' Mother Nature gives up the last of her oil.:D It will be interesting to see what you come up with now.

Made the Vise block out of scraps I had laying around ,, purple heart octagon,,birch dowel pilars and hard maple platform .. Almost cut my fingers off making the octagon,, No big deal , I'd fit in with the gang better at the christmas party . I picked up the wrong size wing nut at home depot ,,had to nut it . The brand new spoke shave I got works great ,,the one off ebay needs work .. horrible ., Could have used some files too I think .. This could be even more addictave ..

Tagger, you waste no time! That's a cool lookin' plug ya got going there. Leave your fingers on, if ya don't it'll throw your handshake off. You're awesome.:claps:

thanks ... The blade in the ebay Stanley 151 spoke shave was junk .. I just ordered a new blade for $5.00 from Rose ... Some really nice carving tools there.. When do the free lures kick in ?

do you mean dull? or just all pitted.

rounded up on the ends,,I'm working it on a stone .. I think they might have planed the heads on a 327 chevy with it ... Ordered a "Pounce Wheel "too for transfering patterns on to wood . Thought I could size fish ,print out and transfer to cand carve,, or cut up really small pizzas
http://roseantiquetools.com/store/page3.html

Nice Tagger, the addiction grows. More tools, more wood, more plugs when does it all stop?

What goes around, comes around, Tagger. It was your enthusiasm and the quality of your work that got me started building plugs again. I'm glad something you can enjoy has come out of it as well.

at it again .. knocking off plastic..

this vice block works the nuts.. great idea.. you invent this Numbskull ..?

first one i made is a little fat ..

WOW nice job!!!:claps: :claps: :kewl:

Spoke Shave Eddie??

This is a Salmo lure from Poland, big hooks look like 4/0 vmc..

where do you get those?

first one i made is a little fat ..
Uh George, your secret is out.

Spoke Shave Eddie??

Too funny:rotf2:

Spoke Band Shave Saw Eddie??? or some variation there of

Tagger those are great shapes. You guys make me want to run out and get the stuff I'd need to get started doing those.

Next year for me, too much on the plate already...:smash:

Too funny:rotf2:

Spoke Band Shave Saw Eddie??? or some variation there of

Gotta get Hydro in there too...

Spoke Shaving Bandsaw Ed, the Hydro Tester....:hihi:

I have to send you more pics and lures


Very nice work...nice thing Numbskull said about you to


Mike

Tagger those are great shapes. You guys make me want to run out and get the stuff I'd need to get started doing those.
Make the block .. probably cost u nothing ,few nuts and bolts probably $3.00
I'm really only using 1 spoke shave , the round one ..
used the exacto knife to cut gills,, don't need a dremmel tool ..
Look up other Numbskull handcarve post ,,,awesome tips..
I'm using white pine ,,cuts like butter ..
I'm just pissed I never tried this before .. Numbskull inspired.. thanks again George ..I suggest you jump right in Diggin Jiggin .. all of yous guys,, try it you'll like it ..

...nice thing Numbskull said about you to


Mike

The feeling is mutual .. "NUMBSKULL" BUILDER of the YEAR

Tagger, I think you'll have even better control with the flat shave for all but sharp inside curves. The blades should be interchangable. You might want to try switching back and forth until you can sharpen the old blade. You've also picked a good plug (the Big-O) to copy. I took a #40 on that same plug this fall. My best fish in years. I lost the plug a day later (it fell out of my bag........ouch) and replacing it is one of the reasons I started fooling with hand-shaped stuff this winter.

Awesome stuff there Tagger!
I'll be on the wagon as soon as I can :-)

Tagger sets the hook.

I think ya got me, I'll have to see what I can dig up for a vice.

You'll know if I get the spokeshaves when I start asking lots of questions. I was trying to watch George's presentation at plugfest but ended up walking a couple of guys thru the drill press set up and missed 1/2 of it...

Gotta get Hydro in there too...

Spoke Shaving Bandsaw Ed, the Hydro Tester....:hihi:

Oh and BTW- did ya forget "Hahnmeister" too. :huh: :D