i have the ron arra 1084 and love it. i'm looking at the surf and jetty as a second rod. any feedback on these?

I use Lami's exclusively. I have the 1L, 1M, 4M, and an old 2F. Tough and dependable. I fish beaches and canal with top water and jigs.

What are you looking to use this second rod for? In most cases I believe the gsb's have a slower action than the arra. I have the 1201M and love it. Lot of guys here seem to like the 1201L too. If you need a 10 footer both of those rods are nice.

I have a GSB 1201L for sale in the classifies.

I WANT A ROD FOR JUST THE CANAL.

I WANT A ROD FOR JUST THE CANAL.

Not sure what you're looking to do in the canal but here's some great info previously posted by Mike P on rods for the canal:


"The Canal has some of the most rugged bottom that I’ve ever fished. It is, in truth, a junkyard on the bottom. When you throw in a current that can exceed 5 knots on a moon tide, you can see why it’s no place for light tackle. Canal fishermen use rods from 8 to over 11 feet. In my opinion, the longer rods are really only a good idea at lower stages of the tide, when you can stand on an exposed mussel bed or other flat spot, and have room behind you to get off a good cast. I usually carry two rods with me—a 9-1/2 footer and a 10-1/2 foot one. The rod should be able to handle 4-6 ounces of weight and still load with two ounces at the low end. It should have a lot of backbone, in order to lift a jig off the bottom in 30+ feet of water, and to put the boots to a fish that’s trying to bury its nose in that junk on the bottom. All of my rods are custom models. There are many blanks that could serve as the guts of a Ditch stick. I’ll list a few—in 9 foot lengths, some good ones are the Batson 1089, the All Star (Breakaway) 1088, and the Lamiglas GSB 108 1M. In 10 foot models, I like the All Star 1208 or 1209, and the Lamiglas GSB 120 1M or the XRA 1205, as well as the old reliable fiberglass 121 3M. Going up the ladder, there’s the Lamiglas XRA 126 1MH at 10-1/2 feet, which in my opinion is the best Canal rod going for big plugs and heavy jigs, then the 11 foot XRA 1322 and the All Star 1418/2 for situations requiring the ultimate in casting performance."