I use a stake to make a nose loop.

Depending on the size of the stake you can make bigger or small er loops. This is made from a 1/4" tapcon screw.

i do the same thing ,,,i have an old drill bit I like in a vice ,, phillips screwdrivers work well too .

You need the new and improved Lu's looper! Makes loops a snap....:D

You need the new and improved Lu's looper! Makes loops a snap....:D

I got ... need directions ... they don't come out right the way I'm doing it ... :spin:

I got ... need directions ... they don't come out right the way I'm doing it ... :spin:

I think it's all in how you hold the wire. Bending the indent on the second side is tough until you learn to hold the wire!!

I think it's all in how you hold the wire. Bending the indent on the second side is tough until you learn to hold the wire!!

yup -holding the wire and the feel/pressure while making the second side is the story.

yup -holding the wire and the feel/pressure while making the second side is the story.

I'll bring it to plugfest ... show me . pleeez

i did the same thing arround a screwdriver.
different sizes.... bigger noseloops on poppers etc...
same for hook hangers.

Dowel pin's and vise grips for me.

I should be making it to the plugfest Eddie and i'll show you.Maybe i should make a couple more to give to John for the plug prize.;)

Great lu hope to see you then I can copy it to make one for myself.

I'll just bring you one Paul.

I should be making it to the plugfest Eddie and i'll show you.Maybe i should make a couple more to give to John for the plug prize.;)

Don't forget mine Lu :D:
please
thanks

I hope to see ya there.