Anyone have any ideas for inside a 8 ft bed ?
Thanks in advance
VB

I've got a short bed now, but this rack has been my last 3 trucks.
Had to give it a nice coat of fresh paint though to put it in the truck I drive now.

I ended up buying a used track rack which has worked out great but here are few ideas I was given previously.

http://www.striped-bass.com/Stripertalk/showthread.php?t=34153&highlight=truck+rack

Mac,
How do you keep that from sliding? I don't see tiedowns or fasteners...

In my truck Peter I have a bedliner with these "slots" molded into the side! So because I did not want to screw or bolt it into the bedsides, and I wanted it easy to remove I built a 1 piece rack from 2 by 4's that is kept in place by the molded slots in the bedliner....holds 9 rods, my big igloo cooler.....all kinds of room! Cost me a couple hours and about $20.00 worth of 2 by 4's and hardware! I will post a pic shorly!

Mac,
How do you keep that from sliding? I don't see tiedowns or fasteners...

I used 1/4" x 3" lags. I know it's crude but then again it is a truck. :)

I haave a short bead, I took a 2 X 12 and cut long enough to go in the slots of my bed liner.
Added 6 plastic rod holders $5 each at walfart. Works great. I am now making a piece to go from the stake holes across the back to hold down the tips on long rides, they bounce pretty good in my short bed. But far from hitting anything.

http://syncboard.com/albums/album03/Picture_111.jpg

http://syncboard.com/albums/album03/Picture_109.jpg

This one is made of 3/4" and 2x4 cedar. Fits inside bed liner.
13 years old, held up pretty good.

Some pics!

One more!

Nice job...