Could someone please give me specs on a Spin Atom ... length,,dia,,hook placement .. working on skin plugs (no secret) .. would like to try a Spin Atom ..

Not sure it is a "spin atom", but I got one that is 5.25 long, 1.07" diameter, weighs 2oz. 2 belly hooks, 1 1/8 back and 3 3/8 back. Don't know if it is weighted, but I have a small wooden atom that is very close in size and weight (5.5", 1.18 dia, and 1.9 oz) that has a 3/16 x 1 1/8 " weight pushed in alongside the through wire from the tail up to the second hook hole (which is 3.5 from the nose). Both plugs use the same size lip as the styrofoam atom jr does. I'll post a picture later. You are welcome to borrow them.

I think recall another size between the flaptail and next one down that I don't have, but have heard of people using with a skin. Probably the one you're looking for.

This little guy?

If this is it, I can lend you one. Let me know.

it's the #54 your looking for....forth one down in numb's pic. that's great for skins......the spin is like the second one up from the bottom that Danny p made and a few others, but these were not used with skins,

The 54 I have in a package is a Jr
The 58s I have is called a spin, but only weighs 7/8 oz and couldn't handle a skin (it is the second from the bottom in the picture).
Was there a 56?

Eddy, don'tlisten to these guys you'll only get confused, the one I use are a #58. 7/8'S of an ounce. Tringular file a groove just back of the lip. Small skin, 3/4 of an inch in diameter. Remove belly treble and tail hook, give the belly treble a good soaking in WD-40, couple shots over a day or two. Get a bead chain swivel ( I get mine at Red Top, they are 2-1/2 inches long and heaily built. Attach this to the plugs rear end eye with a good split ring. At the business end of the Bead Chain add another split ring and a Stainless Steel 6/0 O'Shaugnessy hook. Slide on skin and leave 2-1/2 inches of skin behind the hook at the tail end. Use a 2/0 treble attached with a split ring at belly. You won't beleive how good that thing swims and looks. Caught a lot of large fish on it back in the day both on the beach and the canal. Last hour of the west in the dead of night and let it swing, Reel only when current is not doing the job and v-e-r-y s-l-o-w-l-y. Whole rig when done is maybe 13-14 inches long.

No plug is too small for a skin, remember that and you'll do just fine.

Thats what I want to do Flap ,,,in wood ... I want to copy the spin . I think its the second one up in Numbys ,,also Josh's pic Clogston).. My skin plug works .. I just want to compare see if its an improvement ..

OooooooooK, it is 4 1/8" long, weighs .67 oz (even though it claims 7/8oz), 3/4" diameter (actually they are oblong),belly hook is 1 5/8" back (hooks are size 2's! I think). The taper to the tail (which is concave) starts about 2 3/8" from the nose. The tail dia is 1/2". The lip is 3/4 wide, 3/8 perpendicular, 3/8 front radius. It projects in front of the head 1/8th an inch. Wire hole is 3/16" down. The wire is some smaller gauge than usual. I've got a cellar full of these things, never found much use for them, I'll send you one free.....so I can laugh at you when you try to cast it.

I'll send you one free.....so I can laugh at you when you try to cast it.


If all I catch is a Numby big horse laugh its worth it .. I'll make you one too . Not to fish, but to show others at partys . Be a good ice breaker for you and spare the lamp shade . :jester:

Got it George .. thanks ... Its an itsy bitsy teeny weeny ..

... Its an itsy bitsy teeny weeny ..

Sounds like something I need to think about for smallies :uhuh: Got the lips for them already.

Jigman

Atom made some real tiny ones (2 sizes smaller than the spin). The bottom is 2.75" an 1/3 oz.

Hmmmm... interesting little plugs :D

Jigman