Any demos? Fly tying? :eyes:

I'm gunna demonstrate :devil2:

Larry, I sure would love to see you do an airbrush demo.

Seriuosly.

That might be arranged Flap......who is running the show?

How about the Portly Angler participants do a "Full Monty" halftime show :uhoh:

-spence

How about the Portly Angler participants do a "Full Monty" halftime show :uhoh:

-spence

Can you say mass regurgitation? ooh thats just wrong in every way.

That might be arranged Flap......who is running the show?

Slip seems to have a handle on things as usual.

I am up to it if Skip gives the greenlight....I am no pro but I will give it a go!:lasso:

That would be great larry , thanks :D

I was wondering myself if anyone wants to bring a lathe
i can bring some wood and my chisels and also bring some tying stuff and tie tailhooks

If Clammer comes he can entertain us all ;)

So it shall be done! I will do a little air brush demo!:uhuh:

IIRC, someone said they'd do a tail loop demo. That would be a huge help. Also, I'd love to get some pointers on through drilling.

IIRC, someone said they'd do a tail loop demo. That would be a huge help. Also, I'd love to get some pointers on through drilling.


I can handle the too

No Lathe?
That would be a first... I was looking forward to another off-set turning demo :buds:

If you want a comedy routine, I'm bring my first plugs with me :)

If there is going to be a lathe and turning demo, I have some demo carbide skews and gouges for you guys to try, if there is a desire.:read:

I'd like to volunteer eddie, stripercrazy to show everyone the swirl paint method he uses.

Eddie call me and let me know what colors you'll need and I'll pick them up during the week.

I'll bring the fly vise as I built one a while back and have never used it yet.

I'll bring my tying stuff I can show how to tie dressed tails :bounce:

I will bring a vice and some materials for these little unique hair/blend bonito flies with softex that just crush bones, albies and are VERY durable for blues.

- ATG

dipping...ok:cheers: i got some primed planks....they'll come out good or bad:jester:I never know...bring all colors:laugha:

Stifftip might show, that's like having Don Rickles do a celebrity roast.:jump1:

dipping...ok:cheers: i got some primed planks....they'll come out good or bad:jester:I never know...bring all colors:laugha:

Ed i'll bring some blanks for you too do for me.

Cool ed let me know if you need a hand with the paints etc. Would it be a good idea to have folks bring a primed blank or two of their own for this? So they can get a real hands on? Ed I figure we can setup like 2 - 3 buckets / stations to do this at. Does that work for you?

Great! I have a primed blank or two! Salty, I looking forward to you remedial tail loop class. Mine are every shape but round.

That would be great larry , thanks :D

I was wondering myself if anyone wants to bring a lathe
i can bring some wood and my chisels and also bring some tying stuff and tie tailhooks

If Clammer comes he can entertain us all ;)


Bruce, I can bring my lathe if you still need one. Its a benchtop model so we'd need to have a table to set it on...

Thanks Dave
if it isn't a hassle, bring it as a backup but I think MikeCC is bringing one too and if it doesn't rain I will be able to get mine there too.

If I'v got some peanut bunker hand carves cut out, I maybe could do a foil finish demo is there is interest...

If I'v got some peanut bunker hand carves cut out, I maybe could do a foil finish demo is there is interest...

I for one would like to see that.:uhuh:

If I'v got some peanut bunker hand carves cut out, I maybe could do a foil finish demo is there is interest...

Oh...There's Interest :wave:

If I'v got some peanut bunker hand carves cut out, I maybe could do a foil finish demo is there is interest...


yes

Thanks Dave
if it isn't a hassle, bring it as a backup but I think MikeCC is bringing one too and if it doesn't rain I will be able to get mine there too.

Ok, will do.

And Rockfish, the foil finish is cool, I have been messing with it and I have a hard time with it. It will be good to see someone else do it, maybe I'll learn a few tricks...

that would be sweet!!

Oh...There's Interest :wave:

And how! My heads gonna explode from all the new techniques!

Guys,
question for all of you. If I make it to plugfest, I was thinking of bringing one of my cameras(the video type) and possibly filming some of the demonstrations and possibly, if you guys and John R. are cool with it. create a link on the site with "how to" videos.

-Chris

Sorry Wahlie....I don't think I would like that much. Feel free to tape others though.:cheers2:

Somebody post this stuff on Youtube, I haveta go to FL for vacation and can't attend.

QUESTION on the DEMOS:doh: so I DON'T MISS ANY do you guys have TIMES when EACH will taken place.
GOOD LUCK GOOD PLUGGIN

Not a problem bigfish. Just figured I'd throw it out to the group and that it could be a great addition to the plug building Faq's.:banano:

Saltydog...its a very informal, unstructured event. It just kind of happens so you gotta be there when it starts!:hihi:

QUESTION on the DEMOS:doh: so I DON'T MISS ANY do you guys have TIMES when EACH will taken place.
GOOD LUCK GOOD PLUGGIN

we'll just make an anouncement as things happen
it's pretty laid back


Whalie, you could film my hands making a tail-loop on a plug or whatever.

I'll bring an empty plano box and demonstrate how to fill it with plugs:devil2:

I'll bring an empty plano box and demonstrate how to fill it with plugs:devil2:


:laugha::laugha::laugha:

:lama:

:rotf2::rotflmao:

I'll bring an empty plano box and demonstrate how to fill it with plugs:devil2:

I'll bring my camera. Whomever wants to be filmed just let me know. I don't want anyone to feel any pressure. Don't want anyone thinking that i'm trying to get any trade secrets here ;)

Just camera shy.:hidin:

OK, I didnt have any blanks in box of "extras", so between bouts with the wet vac (fighting to keep m shop from flooding) I managed to trace, cut and sand a peanut blank... so we are in buisness...

If I'v got some peanut bunker hand carves cut out, I maybe could do a foil finish demo is there is interest...

More interest here!! Great idea.

Earleir in the thread,someone was asking about a bench for a lathe, did we come up with a solution... if not... let me Know by 3 PM.. I've got a 6' machinests bench with a heavy wooden top, dissasembled in my storage trailer... I can load it up if we need it... it will only take about 10 minutes to assemble..

there are tables at the club

OK... I'll see ya in the morning..