I'm assuming its the stuff im using but on the two rods I've made the epoxy, after being subjected to salt air it seems, fogs and looks almost marbleized.

Anyone know what is causing this?
im using this product
http://www.mudhole.com/Shop-Our-Catalog/All-Finishes/Diamondite-Pure-Coat-Rod-Finish

Probably did not coat the thread all the way to the ends and water is wicking into the threads under the epoxy. this will cause it to cloud up.

ill try an get a picture tonight to show you what i mean

most likely due to a not properly mixed epoxy. this is the 3rd complaint i've heard of diamondite. or, this could be a bad shipment of the epoxy. contact the company. now, you either need to cut everything off and recoat or try another coat of that or another epoxy to see if that seals it. my guess is that it won't.

most likely due to a not properly mixed epoxy. this is the 3rd complaint i've heard of diamondite. or, this could be a bad shipment of the epoxy. contact the company. now, you either need to cut everything off and recoat or try another coat of that or another epoxy to see if that seals it. my guess is that it won't.

doh. i was really carefull of the mix on the second rod thinking that was the problem.
What do you guys use?

http://www.stripersonline.com/surftalk/showthread.php?t=613377

Check out the part where a Mud Hole employee states that Diamondite is not a rod finish, even though they sell it as a rod finish.:nailem:

Mudhole gave me no answers but told me they forwarded my issue to Swifty Mfg.. And they blew me off.

*Stuff was properly mixed, applied, cured, etc.. I am A N A L about things that could destroy all the labor I put into my rod.

They'll both reap what they sew.:1poke:

Before first use and after several uses.

^^ EXACTLY WHAT MINE LOOK LIKE

that is very aggrivating

http://www.stripersonline.com/surftalk/showthread.php?t=613377

Check out the part where a Mud Hole employee states that Diamondite is not a rod finish, even though they sell it as a rod finish.:nailem:

Mudhole gave me no answers but told me they forwarded my issue to Swifty Mfg.. And they blew me off.

*Stuff was properly mixed, applied, cured, etc.. I am A N A L about things that could destroy all the labor I put into my rod.

They'll both reap what they sew.:1poke:

Before first use and after several uses.

that is a very nice color combo. too bad its all marblized.

Gold
Garnet
Metallic Pewter

This rod is like one of those girl's with the killer body and attitude, but a face that needs a bag. Super enjoyable in the dark!!

J

hahahahaha

Did you wipe the threads with anything to clean the dust or anything off before applying Diamondite?

Did you wipe the threads with anything to clean the dust or anything off before applying Diamondite?

acetone

Acentone leaves a white residue. :( Rubbing alcohol also leaves a residue. :(

DENATURED alcohol leaves no residue. :)

I've never wiped down my threads before I apply the finish. I don't use color preserver. My rods aren't pretty to look at. Built purely for function and strength.

That color combo IS very pretty. :)

Sometimes the NCP thread I use gets a little fuzzy on the underwraps? Does any one know what causes that?? Am I burnishing it too much??

acetone


That be the problem..................:smash: