View Full Version : Lamiglas and St Croix rods for sale.
1dozenraw 10-27-2008, 07:20 AM Here's the list...
1. 11' one piece graphite wrapped at Ericksons. Spinning $150
2. 10' two piece wrapped at Gil's. Spinning $135
3. 8'8" honey Lamiglas (cut down MB1083M) re-wrapped by B-Brothers. $75
4. 9' St. Croix two piece marked 8091-M-9', graphite butt piece with honey glass tip section. $60 There may be a second one of these available. Nice light rods... rated 3/4 to 3oz.
5. 7' custom built at Gil's tuna rod, spinning. Probably a Lami. Had an Ahab 20 on it. $80
I may add to the list, but that's it for now. All the rods are in very good condition. The Lami blank numbers are covered by the wraps. I'd guess the 11' is good for up to 4oz. The 10' 3-4oz. The honey is a great eel and b-way stick that I've used for just about everything up to 4oz. All pick up in SoCo.
There is a matching wrap (to the 11') Erickson's 9' Lami graphite conventional that may be available also... if I don't keep it myself. I'm selling these for a friend who can no longer fish. He had them all built and maintained his equipment very well. I'll meet anyone who is interested in looking at them in the SoCo area as long as you are seriously interested. Thanks. I'll post photos later... got to go to work. The Ahab and Penn 650SS I have posted came from the same fellow.
Pete F. 10-27-2008, 07:26 AM I might be interested, are any of these conventional?
1dozenraw 10-27-2008, 07:30 AM I might be interested, are any of these conventional? Well I used the 11' and a matching 9' conventional all day yesterday at east Beach. Got to say that I may grab the 9' Lami convent. for myself. If I don't it will be added probably at $125 or so. The others are all spinning.
1dozenraw 10-27-2008, 06:06 PM Forgot to mention that the 11' spinning rod and the 9' conventional are a matched set with identical wraps.
29763
29764
stcroixman 10-27-2008, 07:09 PM 1D/R
what size did you throw on the 11' spinning and 9' conventional?
I am being tempted by a package of the matching customs. I live near Ericksons, they do good work. Looking forward to pictures.
1dozenraw 10-27-2008, 07:15 PM 1D/R
what size did you throw on the 11' spinning and 9' conventional?
I am being tempted by a package of the matching customs. I live near Ericksons, they do good work. Looking forward to pictures. I was plugging with both of them yesterday at FPR. Everything from SS 2 3/4oz poppers to big Salty's pencils. 2 and 2 1/2oz bucktails. I'd say they both can handle at least up to 3 1/2 or 4oz easily. The 11 is too big for me... just can't swing an 11' anymore. I really liked the 9' conventional, but I really don't need it. I'll post more photos tomorrow when I can get the rods side by side on the porch. Best thing to do is come see them. I am selling these and much of the stuff I've been listing for the guy who had them built at Erickson's.
animal 10-28-2008, 06:55 PM Kev,I'm interested in the 11 if we could do a trade+cash,or maybe work a finance plan?:bl:
stcroixman 10-28-2008, 07:25 PM I would like to see more photos
1dozenraw 10-28-2008, 07:34 PM I would like to see more photos I'll take some tomorrow and post them.
1dozenraw 10-28-2008, 07:37 PM Kev,I'm interested in the 11 if we could do a trade+cash,or maybe work a finance plan?:bl: Check your pm's on the other site. I left a message.
quick decision 10-29-2008, 05:29 AM whats left?
1dozenraw 10-29-2008, 05:39 AM It is spinning. I'll get photos posted later today. I'm interested in the St Croix rod is that spinning and got any pics?
4. 9' St. Croix two piece marked 8091-M-9', graphite butt piece with honey glass tip section. $60 There may be a second one of these available. Nice light rods... rated 3/4 to 3oz.
1dozenraw 10-29-2008, 05:44 AM whats left?Nothing actually spoken for. Animal wants a look at the 11' and the 7' tuna rod. StCroix wants photos of the 11' & 9' matched set. SaltyB wants photos of the StCroix. But, no one has posted an I'll Take It or actually taken a look at them. I can meet in SoCo or anywhere on the Rt 138 corridor from Hope Valley to the Tower. As I said above I'll post photos later. Thanks.
1dozenraw 10-29-2008, 06:11 AM Any nicks/damage etc? Pending pics I'll take it my son needs a new rod.No ... it is in nice shape.
29782
29783
29784
1dozenraw 10-29-2008, 06:13 AM 29785
29786
29787
1dozenraw 10-29-2008, 06:27 AM That whitish spotting on the wraps wipes off. Not an issue. Wraps are all good.
29788
29789
29790
1dozenraw 10-29-2008, 06:58 AM Here's the 7' tuna rod that was built at Gil's in Wakefield. It has the 1st model Penn 850SS that I'm selling in another thread mounted on it. Originally was matched with a Fin-nor Ahab 20, which is sold.
29791
29792
29793
stcroixman 10-29-2008, 10:03 AM Will you take $225 for a package deal on the 11' and 9'?
1dozenraw 10-29-2008, 10:58 AM Will you take $225 for a package deal on the 11' and 9'?That's a bit lower than I was hoping for. How about $260? I thing that the blank for the 11' currently goes for over $125... but I also know these are older rods.
1dozenraw 10-29-2008, 11:00 AM Looks fine I'll take it unless stcroix really wants them. It's not a necessity for him right now.StCroix wants the two Lami one piece rods. You, I think are interested in the 9' St Croix. St. Croix is SOLD to #^&#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&. PM me and we can arrange for a pick-up or....? Thanks.
mikrok 10-29-2008, 12:12 PM 3. 8'8" honey Lamiglas (cut down MB1083M) re-wrapped by B-Brothers. $75
if nobody claimed it i'll take it, assuming its spinning, if you can hold it for me until saturday or sunday...PM sent!
stcroixman 10-29-2008, 12:31 PM That's a bit lower than I was hoping for. How about $260? I thing that the blank for the 11' currently goes for over $125... but I also know these are older rods.
$225 for both is the best i can do especially since i will need to have those ss guides changed on the 11' for braided line. Otherwise nice looking rods.
1dozenraw 10-29-2008, 02:03 PM 3. 8'8" honey Lamiglas (cut down MB1083M) re-wrapped by B-Brothers. $75
if nobody claimed it i'll take it, assuming its spinning, if you can hold it for me until saturday or sunday...PM sent! Nope, it's still here. Yess, it is spinning. Yes, I can hold it until this weekend. We can meet somewhere down here and make the exchange. I'll pm my phone number. Thanks.
1dozenraw 10-29-2008, 05:20 PM $225 for both is the best i can do especially since i will need to have those ss guides changed on the 11' for braided line. Otherwise nice looking rods.
Offer is accepted... $225 for the pair. PM on the way. Thanks.
1dozenraw 10-31-2008, 01:03 PM 2. 10' two piece wrapped at Gil's. Spinning $135
5. 7' custom built at Gil's tuna rod, spinning. Probably a Lami. Had an Ahab 20 on it. $80
Also have an Ahab 12 and an original... first generation all metal Penn 850SS Spinfisher. Both excellent. They are listed with photos in another thread.
http://www.striped-bass.com/Stripertalk/showthread.php?t=52676
1dozenraw 11-01-2008, 02:45 PM Got the rod yesterday and opened today it's not a 9' it's an 8' though. He's going to have to make due I guess.Nah... can't do any way near as much with 8'....Just sent this PM...
Wow... He gave me two of them, both in two pieces and I read the numbers and label on one and thought they were both the same. I have the other one here in my rack. It's wrapped with cork tape and a Fuji flat reel seat. Send that one back and schedule a pickup for the one I have and I'll send it to you. I'll refund what ever the shipping to me and back to you comes with.... just wasn't paying attention I guess. They are identical... except for that last foot. Sorry. Kevin
1dozenraw 11-01-2008, 04:05 PM OK... two piece St Croix, half black, half honey EIGHT FOOT rod is available. $50 picked up in Uxbridge from SB or $60 shipped. I may start another thread for this... but that's it for now. the 8' is the rod in the photos in this thread. Thanks scott.
1dozenraw 11-02-2008, 05:57 PM Thanks Kevin that worked out good he pulled in 1 minute before me. Appreciate the effort and Thomas will be happy :)Wow... excellent. Thanks Rick and thanks Mike. Sweet.
mikrok 11-02-2008, 11:03 PM great meeting you guys...glad everything worked out perfectly. kevin, i should be down there next weekend...i'll give ya a call or pm
1dozenraw 11-04-2008, 06:16 AM 2. 10' two piece wrapped at Gil's. Spinning $135
5. 7' custom built at Gil's tuna rod, spinning. Probably a Lami. Had an Ahab 20 on it. $80
Also have an Ahab 12 and an original... first generation all metal Penn 850SS Spinfisher. Both excellent. They are listed with photos in another thread.
http://www.striped-bass.com/Stripertalk/showthread.php?t=52676
Also have an 8' St Croix two piece, half black graphite, tip half honey glass. $70 picked up.
I'm putting a hold on the tuna rod until I get some info on the ratings on it for a member.
1dozenraw 11-06-2008, 01:28 PM I'm closing the thread and will relist stuff later. Thanks all and thanks S-B.
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.
|