Here's the finished case. A few guys were looking for ideas so here is what I did.

The front is a 24"x36" picture frame that I put lexan in. I used 1/4" plywood for the back and dado cut into the sides. All joints were glued. The piano hinge was set in with a rabbit cut to make the case close nicely. I put a support arm on 1 side only as I couldn't find a right sided one.

Using a frame for front presented a problem for the lock so I used a shelf pin for the catch. It will only keep honest people honest. To hang it I used a french cleat.

For the inside I used homasote (Thanks Tagger) and stapled the fabric on. (thanks again Ed. I was going to use glue) Sometimes I can't see the forest through the trees.:)

This probably should have gone in the scuppers..... But I don't want to retype it. I type slow;hunt and peck....

Here's the rest of the pictures

The support arm rubs a little, but that is ok. It's not like it will be openned very often.

Here's the finished case.
Using a frame for front presented a problem for the lock so I used a shelf pin for the catch. It will only keep honest people honest. ...

The reason for the lock is to keep BM's sticky fingers out of there. Nice job

Probably a stupid question but how do you keep the plugs in there when you hang it on the wall?

Probably a stupid question but how do you keep the plugs in there when you hang it on the wall?

Push pins or T pins ,,, all different sizes ,, get them at a sewing store .. Dammm that came out nice .. Your too good to be sitting on the bench ..

Probably a stupid question but how do you keep the plugs in there when you hang it on the wall?

Not a stupid question. I had to ask the same thing a while back. There is homasote under the green fabric. T pins are used.

Thank You......Perfect. I just might have to put one ofthese in the Project list.

Came out Pissah there too Mac...:kewl:

NIIIICE WORK, MAC!!!

ssssshhhhhhhhhmoooooth!
real sssssshhhmoooooth!!!
:claps: :claps: :claps:

Nice work Dave...:claps:

Nice

...:kewl:...:kewl:...:kewl:

Here it is loaded and hung on the wall.

that is pretty cool Dave...did you pretty much get one of all the plugs youve made in there??.....great piece of history for the family

Wow.......very impressed.

Nice rack @@ !

Nice job Mac..

This came out very nice!

Nice case, and nice looking plugs too!

That case came out pissa Mac,

looks great dave

Nasty:devil:

Very nice.

verrrrrrrry coool, MAC!!

couldn't help but notice how
displaced the pearl pikie with the pink eye
in the lower left corner looked,,,,,,,,,,,,,

like it would look waaaaay, WAY better in
my surf bag or on the bizness end of my pluggin' rod!!
:bl: :bl: :bl: :bl:

excellent work, Dave!!

SICK

Love it. :musc: