DON'T!!!

$20 low beam...about 2 hours to replace.One broken bracket and a nicely sliced finger.

This car is by far the worst POS I've ever owned.

How about $120 to replace a low beam on an '04 Cad SRX! BTW the bulb is $3, rest is labor to tear apart the whole front end to gain access to the bulb holder.

I still say that after engineers come up with a design, they should mock up the car, have the engineers go service their design and one requirement is that no new tools should need custom making to perform standard service. Can they do an oil/lube in under 20 min on such design?