View Full Version : Bottom paint
macojoe 03-02-2010, 01:56 PM I am going to be leaving my boat on a slip for the first time this year, the boat has some bottom paint on it but will need a new coat, being that this will be in the water for the whole summer I no want to use the crap that I have always used to just touch up.
So what do you guys use ??
Thanks
joebe 03-02-2010, 03:52 PM Abblative from west marine, not cheap, but works well for me and my boat goes in May 1 and out around halloween. Best part of the ablative is it doesn't build up. Designed to wear off.
nautibuoys 03-02-2010, 03:54 PM Ditto. Have had great luck with West Marine CPP (ablative). No weeds, slime or barnacles plus paint doesn't build up (sloughs off like a bar of soap).
MakoMike 03-02-2010, 04:05 PM I've also been using the west marine ablative.
macojoe 03-02-2010, 04:59 PM Thanks guys!! I like the no build up part of it.
What is the coverage per gal?? I have a 23' boat
Thanks
keeperreaper 03-02-2010, 06:23 PM West marine ablative but you will pay for it.
blaruffa 03-02-2010, 07:53 PM I use ePaint EP2000ablative, I like as much as the West Marine but it is better for the environment. The other thing I like is my boat is white and they make white paint. Most people dont even notice that my boat is painted, which I like.
freebie 03-02-2010, 08:04 PM the best way to use ablative is to use a barrier coat then a coat of hard bottom paint followed by ablative. if you use a different color for the hard bottom paint the you can see where you need to touch up the next year. it's alot of work and a little expensive in the beginning to do it that way but end up being less in the long run as you only do touch-ups after the first time. also leaves you some protection if you wear through the ablative.
nautibuoys 03-02-2010, 08:20 PM I can do my GW 232 (9'4" wide) in about 3/4 gal. If yours is a 8' 6" hull, it should be a bit less.
macojoe 03-02-2010, 09:21 PM freebie the best way to use ablative is to use a barrier coat then a coat of hard bottom paint followed by ablative. if you use a different color for the hard bottom paint the you can see where you need to touch up the next year. it's alot of work and a little expensive in the beginning to do it that way but end up being less in the long run as you only do touch-ups after the first time. also leaves you some protection if you wear through the ablative.
My boat has been painted for years, but that is a great idea!!
nautibuoys I can do my GW 232 (9'4" wide) in about 3/4 gal. If yours is a 8' 6" hull, it should be a bit less.
Looks like one gal will do it, Thanks!
Thanks for all the info guys!!
Interlux ACT (ablative). Jamestown distributors has the best on the net paint prices. (IMHO).....
I got 4-5 seasons on the first application with only touch-ups.
Repainted totally last season and again I only a few touch ups.
Good luck.
piemma 03-03-2010, 03:50 PM Interlux ACT (ablative). Jamestown distributors has the best on the net paint prices. (IMHO).....
I got 4-5 seasons on the first application with only touch-ups.
Repainted totally last season and again I only a few touch ups.
Good luck.
Ditto on the Interlux ACT and Jamestown. Great people to do business with.
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.
|