Was wondering if you guys had any pictures or comments on what you like to use once you have used your sealers, primers, or paint for a drying rack or stand

Was wondering if you guys had any pictures or comments on what you like to use once you have used your sealers, primers, or paint for a drying rack or stand

Picture a coathanger with a crook at one end and a kink at the other.

I just started building this spinner/drier. I was putting a piece of bailing wire with a loop on one end through the plug and hanging from a nail in the joist above the boiler. Now I am building this box to dry paint and epoxy. I have to insulate it and add the lighting for heat, then put the doors on. The doors are wood frame with plexi-glass. I don't know if I'm doing things right or wrong.....but I'm having a hell-of-a-time doing it.

I use pieces of 2 by 6 with holes drilled into it about 3/4" and all my plugs have piece of 1/8" rod about 10" long in the tail and I use the rod to hold them from sealing to priming and painting and clearcoat! Easy and cheap!:uhuh:

I hang mine from a 4 foot section of closetmaid wire racking from Home Depot. I bend hangers and put them in the through hole to hang dry.

I have a piece of copper that does double duty as a water pipe. And very special crooked wires.