texican
08-29-2010, 12:42 PM
From this thread http://www.striped-bass.com/Stripertalk/classifieds/65347-batson-sw1209-spinning.html I was impulsive and it went from Rizzo's hands to my rafters and has not moved. Willing to let go for $120 pick up in the wareham/canal area.
1dozenraw
08-29-2010, 01:04 PM
From this thread http://www.striped-bass.com/Stripertalk/classifieds/65347-batson-sw1209-spinning.html I was impulsive and it went from Rizzo's hands to my rafters and has not moved. Willing to let go for $120 pick up in the wareham/canal area.What kind of shape is it in? Any nicks, cracks in the epoxy on the wraps, wear/corrosion on the guides? No idea how much Rizzo used it.... so gotta ask. Distance from butt end to bottom of the reel seat? I asked the original seller this, but I think it was gone to you by the time he got the questions. I'm interested... have one wrapped conv. If it's in excellent shape still and the butt length is good for me, I'll take it for $120 picked up. Thanks.
texican
08-29-2010, 01:22 PM
It's in great shape IMO. Superfical scuff marks on the epoxy but nothing that has damages the blank as I recall. I will check the distance of the reel seat and get right back to you.
texican
08-29-2010, 01:31 PM
Just double checked the condition of the rod. Guides are great no cracking, 24 inches to the middle of the reel seat. And the "scuff markS" should be singular and very very minor with no damage to the blank, looks more like a rub.
1dozenraw
08-29-2010, 01:48 PM
Just double checked the condition of the rod. Guides are great no cracking, 24 inches to the middle of the reel seat. And the "scuff markS" should be singular and very very minor with no damage to the blank, looks more like a rub.Sounds good. I'll take it... might as well have a matched set. Thanks. PM coming.
texican
08-29-2010, 02:08 PM
Sounds good. I'll take it... might as well have a matched set. Thanks. PM coming.
Sold pending payment.
afterhours
08-29-2010, 05:21 PM
he strikes again :). kev, you have a warehouse?
1dozenraw
08-29-2010, 05:39 PM
he strikes again :). kev, you have a warehouse?You know Don... everyone thinks that. I have a three rod racks which hold a total of twenty rods. I always try and keep the total to 20 or under. But, I started out 6-7 years ago with a Tsunami cheapy 10' and an old beat up 9' Lami that had once been nailed to a porch post and had a wind sock tied to the only remaining guide... the tip. What I've done is buy better and better rods and blanks. I'm about done (hahahah) I think, because most of my rods now are customs, one piece, built on blanks I have learned are the better end of the spectrum. AllStar 1088, 1208, G Loomis 1266, Lami 10 honey, GSB 1201L and M... and a few Rainshadows, 1088 and 1208 and 1209 some SWs and some SUs... couple of early Sabres... oh yes and a 10' JKFisher. Might search for an Arra or two... but that is about it. But, I've always kept it around 20 or less. So compared to many, I'm not at all over stocked. Anyway, this filled a gap. May not use it all that much, but it was wrapped well I'd guess and it was reasonable.
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.