Hi all,
I have 2-60,000 btu furnace blowers up for grabs. They don't have motors, its just the blower unit with a motor bracket. A while back I saw a movie on a spray booth that moved a lot of air and they were using the same type of blower system.

These are pick up only.

Cheers,
Mike

looks familiar Mike, I started building a spray booth for mine. Thanks again. Merry Christmas!!

not familiar with em -so these are fans sorta?
they don't produce heat...

not familiar with em -so these are fans sorta?
they don't produce heat...

Yes this is a blower fan from a furnace, this type of fan moves a lot of air. The round hole in the side off the housing is the intake and where the flat side is the exhaust is. You could probably make something to help distribute the heat in the green house with one.

I plan on making a couple of boxes, one for the spray booth and the other for the blower fan. I want to be able to melt lead and plastic in my shop and not have to worry about the fumes.

Correct they don't produce heat, they distribute it.

So that is what that is. I've got a similar set up, I picked up. It has two of those mounted on each side of a single motor. Someday I may make a booth or an air filter with it. I've got at least a dozen axial fans at 239 cfm that I have to use first.......

i have no idea what there worth to make you an offer

i have a system in place to make the hot air but no way to deliver it

No need for offers, there free...

I should be up your way next week PM me your address.

PM sent

before i read this post

second pm sent

Closed