Where do people buy plexiglass with paper on both sides for making templates for their Vega duplicators. I jusy picked up a used 36" Pro model and plan to use it for table legs and plugs

Home Depot or Lowe's!:uhuh:

Thanks Larry- my local Friends lumber did not have the brand with the paper backing... only plastic which can be difficult to draw on

I got some from a local glass place, it's not cheap, but depending on the size it shouldn't be too crazy.
Posted from my iPhone/Mobile device

If you go to a glass place ask to look through the scraps. lots of times most of the scraps are almost perfect size for what you need.

mcmaster

Lexan type material at Lowes. It's cheap.

scraps at your local hardware store...usually free

HD or lowes

I found mine at an estate sale. I new I should have bought all of it!!!!

Don't worry about paper on it just cover with masking tape to mark on.

Dumpster behind sign company.

Dumpster behind sign company.


Nice, great idea.....

Thanks for sharing!!!!

I used to print out shapes on paper and then just lay the plexi over the paper and trace a line with a sharpie... Then cut. Simple.
Posted from my iPhone/Mobile device

Dumpster behind sign company.

Dumpster Diving can be very satisfying... There was a big house going up in my neighborhood and the scrap mahogany trim pieces I found were unbelievable

Thanks for all the great ideas...