Here are a few new ones. The eels are Birch 8.5" long and weigh 2.25oz. I have them weighted to be a dive and rise jerk bait, Musky's do like a longer profile. The darter is a copy of a profile I did a couple years ago. It is maple 7.5" and 3oz. The paint is pretty slick, it's just black paint overcoated with Isis Blue Pearl and Rainbow metallic powders added to the clear. The last one was built to mimic those tiny fingerlings that like to hang out under any pier. It is basswood, throughwire, weighted, and comes in at just 1.5"

Douglas

awesome as usual, like the lip protector on the darter. I'm a sucker for anything metal either added on or all metal.

Very clean work :btu:
I like that tiny bait, the hooks almost look too big for it, but it's such a small body.
ya, that metal on the darter is cool

Nice darter.......looks very similar to the Pichney darter.

I'm surprised to see a freshwater version of such a classic saltwater plug...although why that doesn't happen more both ways I don't understand.

Have darters caught on for muskie fishing, or are you at the forefront of it?

Numbskull, No darters being used as far as I've seen, but they may have just the right trigger. Many times a Musky will put it's nose on a bait and follow it right to the boat without hitting it. A technique to get them to hit is to change direction, or figure 8 at boat side. I'm sure you surfcasters can work darters very slowly and get them to dart due to the waters movement. On an inland lake however, I need speed to get them to dance, but Musky's love a speedy presentation. I believe that the darters ability to jump off course, may provide the trigger to strike before they get to the boat.
I think that there are many plugs/lures that can do the crossover. One of the differences is where it is made to work in the water column. Many striper plugs are designed to be surface or just sub-surface, whereas Musky plugs go from surface down to 15 feet or so.

Douglas

Some saltwater things I've learned.

If you want your darter to dig, push the nose loop back further onto the slope. Yours is ahead of the brow and that will make the plug more stable, but also run shallower. The very front of the wire loop could be as much as 1/8" behind the brow of the plug. Too far and the plug will start to roll, but there is a sweet spot just ahead of that where it will dig deep and work hard side to side.

If you want depth, the conrad is a good design, but swims slow and fish often track it, striking when it is paused. That may be more a bass than muskie behavior, since bass inhale rather than impale their prey. From a boat you can get it pretty deep, particularly if you hold your rod down in the water.

A slopehead design, using a high slot lip that has been re-bent to a more acute angle also can get you down 10+ feet and work there faster than the conrad.

The bottle darter, is another stable design that digs quite deep at speed and has a fairly tight fast wiggle. They don't "dart" much. I'll bet a musky would like 'em though.

That clear coat on the darter is beautiful.

That metal lip protector on the darter is perfect.

Clean looking plugs as always.
Posted from my iPhone/Mobile device

Nice Douglas, love the metal lip darter.