Delta 9" Bench Band Saw
Brand New
$75. or B.O.

I'm interested, any trades?
Posted from my iPhone/Mobile device

I'm interested, any trades?
Posted from my iPhone/Mobile device

no trades, sorry I dont need anything

$50. Chef????

Ill take it!
Posted from my iPhone/Mobile device

Take it Chris...I have the same ome and it works great. Perfect for your size shop.

Ill take it.
Posted from my iPhone/Mobile device

Been trying to respond since 9:15, no service in rockport mass
Posted from my iPhone/Mobile device

Matt I'll call you and grab it for Chris
Posted from my iPhone/Mobile device

That saw uses 59 1/2 " long blades. Have a few made up custon using 18 Teeth per inch. If your building plugs you will thank me. 1/4 inch wide blade stock.

Ill take it.
Posted from my iPhone/Mobile device

Matt I'll call you and grab it for Chris
Posted from my iPhone/Mobile device

sounds good men.

You don't happen to have a drill press kicking around do you?
Posted from my iPhone/Mobile device

no, sorry......but do you need hand carve tools? I'm never going to make plugs...I have a spokeshave and sharpening kit.....

I just need a band saw, drill press and vise with soft jaws.

Thanks though.
Posted from my iPhone/Mobile device

That saw uses 59 1/2 " long blades. Have a few made up custon using 18 Teeth per inch. If your building plugs you will thank me. 1/4 inch wide blade stock.


Didn't you post something on setting up a bandsaw 7 years ago. I swear I read something on setting up the saw that made it cut perfectly. Something to look into Chris.
Posted from my iPhone/Mobile device

Didn't you post something on setting up a bandsaw 7 years ago. I swear I read something on setting up the saw that made it cut perfectly. Something to look into Chris.
Posted from my iPhone/Mobile device

I bought the same saw 2 years ago from someone on the board. I cannot remember who but I love the saw for making the slope head on surfters.

no, sorry......but do you need hand carve tools? I'm never going to make plugs...I have a spokeshave and sharpening kit.....

Interested in the sharpening kit. I have trouble sharpening my gouge I use for turning. It's a Sheffield made in the UK and cost me $100 so it's not the tool it's the operator:rotf2:

If you want it maybe Andy can grab that too, ill meet up with Andy and grab the saw and kit, then ill meet up with you.
Posted from my iPhone/Mobile device

Paul if you want it I will grab it from Matt.

Interested in the sharpening kit. I have trouble sharpening my gouge I use for turning. It's a Sheffield made in the UK and cost me $100 so it's not the tool it's the operator:rotf2:

I just tossed the basement looking for it....if I find it I'll pm you. It's nothing special just a stone with a guide.

I just tossed the basement looking for it....if I find it I'll pm you. It's nothing special just a stone with a guide.

Thanks, if you find it, I'll take it.

Didn't you post something on setting up a bandsaw 7 years ago. I swear I read something on setting up the saw that made it cut perfectly. Something to look into Chris.
Posted from my iPhone/Mobile device

I seem to remember a thread from back then. Someone was having trouble making a straight cut with his band saw. I posted my 2 cents worth along with a bunch of other guys.

Andy I'll get in touch this week. It was a hectic weekend.
Posted from my iPhone/Mobile device

Sounds good Matt , thank you.

thanks Chris & Andy....nice to see you & Moose today....

thanks Chris & Andy....nice to see you & Moose today....

Thanks matt, hoping to meet up with andy tomorrow and start some hand carves :uhuh:

thanks Chris & Andy....nice to see you & Moose today....
Good seeing you too my friend, hopefully see you in the spring :fishin:. Chris picked up the saw yesterday.