Spun some conrad/slpoeheads. white pine. There seems to be a mix of where & how much weight. This plug is 1.125"dia. & 7 .25 long. I have 2 weight holes at the dimentions of 3" & 4" back. Approx 1/2oz. each hole?? i archived an article from the Fisherman mag in 2008. The weight locations being 1/2 hole are 3.5 & 4". Physically thats impossible so it may be a misprint. so I assumed 3 & 4". suggestions??

we talking Jr. or Sr. ?

Paul that's the senior slopehead.

http://www.striped-bass.com/Stripertalk/plug-building-got-wood/67868-conrad-info.html


Looks like just 1 wt for the non slopehead 7.5 inch Conrad sr

there you go. Thanks C.

Paul 2 things: On the SR. is it 3/8 dia. or 7/8"weight ( pix looks 7/8")? What kind of wood did you use?

Paul 2 things: On the SR. is it 3/8 dia. or 7/8"weight ( pix looks 7/8")? What kind of wood did you use?

Can't help you with the diameters, but on the senior slopehead I got from him, he told me he was using pine.

AYC. It is probably 7/8 long 3/8 diameter if memory serves me right. You will have to drill thru the wgt. after it is epoxied in place for thru wire.
W
Posted from my iPhone/Mobile device