Any idea where I can get a rigging needle?

Saltwwater edge, red top are two that i know of. I never asked Mike ay M&D's.

Any shop that has a decent offshore fishing section should have them.
Posted from my iPhone/Mobile device

If you have plug through wire you can make one in about 3 min...
Posted from my iPhone/Mobile device

I've bought a few different ones. The one I made from a coat hanger is the best I've found.
Posted from my iPhone/Mobile device

River's End has all the rigging gear you need

CMS
Posted from my iPhone/Mobile device

Jo Ann fabrics

Michaels

Saltwater edge

I use plug thru wire, free of you cut up an old plug or plug with no mojo
Posted from my iPhone/Mobile device

chinese food take out box - if you cant get to plug wire or a rigging needle

Thanks Guys.

I was picturing more of a "surgical" tool...Im sure I have something I can jam through there....

Are you talking a rigging needle for eels? If yes

Cut the straight sectipn off a coat hanger. Hammer one end plat for about 1/2 an inch. drill a hole in the flattened section , using sandpaper or a grainding wheel , grind the other end to a sharp tip. In fact , it can be too sharp. You want it to go through the eels inner canal , not through the meet so say medium sharp.

Are you talking a rigging needle for eels? If yes

Cut the straight sectipn off a coat hanger. Hammer one end plat for about 1/2 an inch. drill a hole in the flattened section , using sandpaper or a grainding wheel , grind the other end to a sharp tip. In fact , it can be too sharp. You want it to go through the eels inner canal , not through the meet so say medium sharp.

Yes Eels. This worked Pissa! Thanks!

Yes Eels. This worked Pissa! Thanks!

Thats the same procedure for ss through wire....
Posted from my iPhone/Mobile device