After wrapping and epoxy?

I let mine sit for 3 days, but have fished some one or 2 days after.

Depends on the weather and humidity.

The more the better.

You finish the s2 finally?
Posted from my iPhone/Mobile device

Lol nope, gonna wrap and glue tomorrow... Hoping to be able to fish it on Cutty... If not I'm pretty screwed so it should be interesting Lol.
Posted from my iPhone/Mobile device

Worst case do a coat, brush most of it off. Wait 24 hours. Fish it. When you get back from your trip, lightly sand it and give it another coat (could do another thin coat brushed off, dry, third coat; or just do a second coat). With my ADD, I have done it more than once that way with no ill effects. Al goldberg had a how to on sol with 3 thin coats similar to what I described. I have fished many rods with just the first coat. It is thin enough that it won't crack even after only 24 hours drying time.

Depends on what finish you use. Some like Flexcoat harden up pretty quickly. Aftcote takes longer.

I usually recommend about 3 days in a nice warm place after the final coat but I know people fish them after an overnight cure. The down side is an earlier (maybe immediate) cracking of the finish at the guide feet.

Lol nope, gonna wrap and glue tomorrow... Hoping to be able to fish it on Cutty... If not I'm pretty screwed so it should be interesting Lol.
Posted from my iPhone/Mobile device

Ian you win the 11th hour award!

Still haven't started wrapping... I suck
Posted from my iPhone/Mobile device

I have you covered if you can't finish...

Epoxy applied. Should be fishable by the time I'm on the island... I guess it was the last minute of last minutes
Posted from my iPhone/Mobile device