Getting ready. Shooting for April 20

Very jealous.... I am presently targeting.... July 22. Two months after knee replacement surgery.

Getting ready. Shooting for April 20

Same here John, good luck

won't be far behind have to get some domestic chores completed 1st:btu:

I picked the right winter to forget to wrap my boat... Its uncovered, clean, and saved on wrapping cost and the time it would take to unwrap .

I got lucky... I plan to wrap next winter.

We just moved and I somehow forgot the box that I put the bag of parts to connect the leg back to the motor... it’s going to be a frantic first week of May when we finally unpack after renovations...

The list of notes I write myself just continues to get longer
Posted from my iPhone/Mobile device

Nice,let's hope it doesn't snow. wrapped up my ice fishing season Saturday, cleaned and stowed all the gear yesterday, switched the bait tank from winter mode, and replumbed. It for the boat, cover coming off next weekend.
Posted from my iPhone/Mobile device

What’s a cover 🤔
Posted from my iPhone/Mobile device

Watching the water temp... maybe by the last week of April I'll go out on first squid trip of the year. Installed a nice spread of underwater LEDs this weekend and tuned up both motors. All I need to do is power wash the deck and do some touch up painting.

Nothing pretty, she's as old as I am, but she gets me out on the water.

I picked the right winter to forget to wrap my boat... Its uncovered, clean, and saved on wrapping cost and the time it would take to unwrap .

I got lucky... I plan to wrap next winter.

Think about that and save yourself some $. I never wrap my boat anymore. Less damage/clean up than when I did wrap it.

been telling you guys for years about the waste of $$$$$$$$$$ finally a couple of us have found out the boat didn,t melt ><><

Think about that and save yourself some $. I never wrap my boat anymore. Less damage/clean up than when I did wrap it.

You obviously don't live near trees, if I tried that stunt. I'd spend the entire spring and half the summer digging pine and spruce needles, as well as oak leaves out of the boat, and most winters there would be about 6" of solid ice inside the boat from all the melted snow. .it might work down south, but up this way, you cover it or pay dearly.
Posted from my iPhone/Mobile device

You obviously don't live near trees, if I tried that stunt. I'd spend the entire spring and half the summer digging pine and spruce needles, as well as oak leaves out of the boat, and most winters there would be about 6" of solid ice inside the boat from all the melted snow. .it might work down south, but up this way, you cover it or pay dearly.
Posted from my iPhone/Mobile device

You obviously have never tried it. A shop vac makes quick work of any leaves or other debris that land in the boat over the winter. We have plenty of trees in Wakefield where I keep my boat. If you're worried about ice build up, I guess you don't have a self bailing deck? That might be a legit problem.

You obviously have never tried it. A shop vac makes quick work of any leaves or other debris that land in the boat over the winter. We have plenty of trees in Wakefield where I keep my boat. If you're worried about ice build up, I guess you don't have a self bailing deck? That might be a legit problem.

Key words in his post were pine and spruce... means sap. Ever tried getting pine sap off a car or boat? Easier to cover. And even the leaves will stain from the tannins in them. To each their own... At 20' mine is covered. Same cover for eleven years.

Key words in his post were pine and spruce... means sap. Ever tried getting pine sap off a car or boat? Easier to cover. And even the leaves will stain from the tannins in them. To each their own... At 20' mine is covered. Same cover for eleven years.

I think the "save your money" people are speaking of is for those that automatically think "cover the boat" means shrink wrap.

A nice reusable cover like yours or tarps or plywood that some use I would consider covered, but many of my friends here say it has to be shrink wrapped.

I cover with a couple tarps and vacuum/power wash the deck each spring.

all I have is pine trees & red maples …………… WTF are leaves & needles ……….:humpty::humpty:

No cover.. because I have the room to keep it inside my workshop....only thing to clean off is a thick layer of sawdust.





bluefish frenzy from last year https://youtu.be/uBCQVdi60z4

Whenever I have the boat shrink wrapped, all my vinyl seat covers have dark mold that is beyond difficult to remove. this is the first year I didnt get it wrapped and its the cleanest my boat has ever been!


My fear for next year is the weight of potential snow on the T-top if I dont get it shrink wrapped. any suggestions?

Whenever I have the boat shrink wrapped, all my vinyl seat covers have dark mold that is beyond difficult to remove. this is the first year I didnt get it wrapped and its the cleanest my boat has ever been!


My fear for next year is the weight of potential snow on the T-top if I dont get it shrink wrapped. any suggestions?
Make your shrink wrap cover able to breathe. That will help
Posted from my iPhone/Mobile device

Whenever I have the boat shrink wrapped, all my vinyl seat covers have dark mold that is beyond difficult to remove. this is the first year I didnt get it wrapped and its the cleanest my boat has ever been!


My fear for next year is the weight of potential snow on the T-top if I dont get it shrink wrapped. any suggestions?


You really need to have allot of vents. Like a Pepsi bottle cut in half and taped to the side. Multiple of those. Lots of airflow. The shrink wrap covers are just too damn tight

This year I went with the silver harbor freight tarp for $60 vice the $240 shrink wrap. Holding up well
Posted from my iPhone/Mobile device

My fear for next year is the weight of potential snow on the T-top if I dont get it shrink wrapped. any suggestions?

It's going to weigh more shrink wrapped than it would unwrapped.

It's going to weigh more shrink wrapped than it would unwrapped.

Exactly, pretty sure the shrink wrap pulls down with more force then the snow would.

Exactly, pretty sure the shrink wrap pulls down with more force then the snow would.

FWIW, back in the day, before I knew better, when I did shrink wrap my boat one of the things that broke was the sunshade on the tower. Very similar to a t-top. I think it was caused by the wind being caught by the shrink wrap and flexing the legs.

Still not sure it was worth the work, but I've used 8' - 1" pvc conduit piping bent over areas of concern...bit of work securing the pvc and keeping it upright, but it did help with the center console area as well as the void in the bow