Originally Posted by Mike P (Post 171882)

GEAR UP

The Canal has some of the most rugged bottom that I’ve ever fished. It is, in truth, a junkyard on the bottom. When you throw in a current that can exceed 5 knots on a moon tide, you can see why it’s no place for light tackle. Canal fishermen use rods from 8 to over 11 feet. In my opinion, the longer rods are really only a good idea at lower stages of the tide, when you can stand on an exposed mussel bed or other flat spot, and have room behind you to get off a good cast. I usually carry two rods with me—a 9-1/2 footer and a 10-1/2 foot one. The rod should be able to handle 4-6 ounces of weight and still load with two ounces at the low end. It should have a lot of backbone, in order to lift a jig off the bottom in 30+ feet of water, and to put the boots to a fish that’s trying to bury its nose in that junk on the bottom. All of my rods are custom models. There are many blanks that could serve as the guts of a Ditch stick. I’ll list a few—in 9 foot lengths, some good ones are the Batson 1089, the All Star (Breakaway) 1088, and the Lamiglas GSB 108 1M. In 10 foot models, I like the All Star 1208 or 1209, and the Lamiglas GSB 120 1M or the XRA 1205, as well as the old reliable fiberglass 121 3M. Going up the ladder, there’s the Lamiglas XRA 126 1MH at 10-1/2 feet, which in my opinion is the best Canal rod going for big plugs and heavy jigs, then the 11 foot XRA 1322 and the All Star 1418/2 for situations requiring the ultimate in casting performance.

Most Canal regulars use conventional reels. They offer big advantages in casting, and in controlling a big fish in heavy current. I’ve retired most of my older reels, and use Abu Garcia Ambassadeurs almost exclusively. The smaller 6500 size reels, as well as similar sized Calcutta 400s and Penn 965s, can be used if spooled with thin braided line. My preference has always been the larger 7000 size Ambassadeurs. Many old timers still prefer to use non level-wind reels. Some still use the old Penn Squidders, but most now use more modern reels like the Newell 229 and 235, and the Daiwa Sealine 30s.

If you’re more comfortable with spinning reels, I would suggest that you invest in a model with strong gears. Fortunately, they are available. The spinning reels I have the most confidence in are the older Penn Z-series models 704 and 706, the newer Mitchell Nautil 7500, and of course the Lexus of spinning reels, the Van Staal.

Some holdouts still do all of their Canal fishing with mono. I’ve switched over to the new thin braids for almost all of my Ditch fishing. They offer many advantages. They are incredibly thin for their strength. The thin diameter means it penetrates the water better and isn’t as wind resistant, which allows you to get a jig down to the bottom better. They allow you to use a lighter jig, which is less prone to hanging up. And, their sensitivity is unbelievable. You can feel the bottom better, you can detect when your jig is hanging up sooner which allows you a better shot at rescuing it, and you can almost feel the fish breathing on your lure before it hits. There are a few drawbacks to braid, and lack of stretch can be a two-edged sword. It’s easier to tear hooks loose from poorly hooked fish, especially with a stiff rod, and it’s easier to put too much pressure on treble hooks causing them to straighten. Also, when using surface plugs like Polarises and pencil poppers, it’s easy to catch “buck fever” by yanking the lure away from a fish before it has a chance to get the hooks in its mouth---so mono still has its place in my tackle bag. I suggest 25# or 30# mono, 30# Fireline, or minimum of 50# spun braid for the Canal.