a VS conventional would be a wonderful thing!:D

I was never much a spinning advocate myself...

I may consider a Calcutta, or other performance conventional this season.

I do like the ABU reels though...

Im sure If VS made a conv reel it would Be smooth.
I wonder if they would balance the spool (hint)

I hope that VS does eventually produce conventional!

I'm sure that it would be an extremely smooth reel.

Imagine a conventional reel with an extemely balanced spool that is literally suspended by miniature superconductor magnets...

Something like that could revolutionize the long cast!...

I'm also guilty of being a VS basher. Its ok to dishout $600 for a shot gun that gets used two weeks in the fall....verse a $450 on a reel fished atleast 6 months of the year."if you fish" then there are those who have VS's just to support their reputation or just because they can afford it. I currently don't own one yet, if you take your passion seriously and fish alot in the surf , not on the edge, then I think its a wise investment.

Im not into the stat thing, I blow up stuff and B sick of it.
thats why I use them things.

Some thoughts on savings some pennies if you want a VS:

You might want to consider getting a used first-generation VS reel. I see them popping up for around $300+ or so.

Then send 'em to the factory for an annual servicing (unless this has already been done) for an extra $40.

OK, before this thing turns into a complete waste of time.....

Anyone else have any experience with these long cast reels?

At the moment the peanut gallery has responeded told us that it doesnt like to get dunked and is easy to fix.

Is it worth the $$ or is there a better mousetrap?

Mike-

They cast great. They fight great.

They don't like to be dunked - the drags get awful sticky after a few splashes.

They are a good value for the money - if you don't plan on dunking them.

One thing I found when disassembling them ... the rotor (and most of the body) is made of plastic, some of it very thin in certain places. Easy to crack. This is NOT an issue when fishing...just when you're trying to take apart the reel to clean it.

I like the reel's performance, I just wish it could be made dunk-worthy.

-WW

Mike whats wrong with the naut 7500,worked ok for me last yr and it likes to swim.And mikecc has for 130 now.:D

MIlo, didnt know Nautil was one of those long spool setups.

I know its not as long as the one your talkin about but its not that bad

A few observations:

Spinning-reel casting distance is largely a function of large spool diameter coupled with small line diameter. VSs have comparativlely wide spools (compared to other reels of equal overall size) and so can allow good distance with fine-diameter line (e.g., 14# Fireline). Similarly, the old Penn 706 has a very wide spool and could be considered a distance-spinning reel. The Daiwa Emblems have huge spools and are probably the best as long as distance is the PRIMARY consideration. I have and use all of these. "Course if you really want to cast to the horizon, you'd wanna look at one of those Alvey thingies--the widest spool of all--which I haven't tried, but look like fun! Hope that's in some ways helpful.....:) --OJ

well dont you know you cant compare guns and reels....SHEESH! two totally different things...;)

...OldJohn, the line diameter I agree with, but I personally think it's the spool's height, not diameter that increases distance. The diameter increases the line volume, but the height of the spool makes it easier to allow the line to come off. Actually with a large diameter and not enough line, your killing your distance.

IMO-

...the line has less resistance with a longer spool as opposed to a wider one.

Bloo, I agree with your theory.

The tall boys always go down faster than those little 7oz mini cans.

Must be less friction.:smash: :happy:

Hey Tattoo,

I have both reels (Emblem and VS reels) and used it with my favorite Lami. 1322. If you are just looking to get maximum distance with a spinning reel – You should get the Emblem hands down because it is designed for distance casting - but I do caution you with this… The Emblems are NOT a fighting machine like the VS 250 / or 300 and if by any chance it gets dunked… Guess what? Party is over! The Emblem drags are very temperamental and the first thing to go. It will be destroyed in no time (it happened to mine) and IMHO, it lacks the required torque (due to design and high speed ratio) to subdue a quality fish!

Now, I have several VS and I am content with it! The 250 or 300 are great casting machines if you do the following. Use thin braid, fill line to the spool’s rim, before casting - turn the handle until spool is extended out of the cup, make sure to use ample topshot/shocker and you are good to go! With those simple adjustments, you will be amazed how far you can cast! The beauty of it all… You have a distance casting machine with enough muscle to control big fish! And the best part of it all… It’s okay to dunk it!

With this in mind, I will tell you a related story, my friend Arra and I were at the canal… He’s using his conventional and I had my 250 and his Sig. 1322 series rod. We are side to side casting major distance and culling fish. One point there were fish past the ¾ of the canal… I punched a cast with all I’ve got and it got Ron’s attention. He said… “Wow, that’s some cast Al… and is that my rod?” I said… “Absolutely Ron… I love the rod and I also did some minor adjustments to the outfit.” ;)

Hope this helps.

“Crazy” Alberto

Tattoo: I've got three Daiwa Emblems X5000T's. They cast a mile - farther than any other reel I've used. However, they have no IAR and that's a huge problem for me especially when throwin' jigs. The damn reel handle/cranks bang back against the shaft very badly. Causes problems in the long run ( about 25 hours worth of this banging and that's it - Repair job). I also would be very hesitant to get it soaked - a little to fragile for too much abuse.

check yopur pm's jenn:af:

ink-man, do me a favor. either buy another vs and throw braid on it or buy one of longer casting conventional reels, such as a 6500mag or penn 525. you buy one of those other reels and i'll see you on this board bashing it in 2 months or less of fishing. we know how we punnish our tackle where we fish. and, if the wind is honking in your teeth, why aren't you casting at your feet!

vs was working on a prototype conventional reel before the new owners took it over. not sure where that stands. if you think a vs spinner is expensive, wait for that conventional!

:eek:
Yikes, between Crazy Alberto's and JPowers' posts, I wonder why I want one of these reels :(

I thought ya could jig with it, guess not. I thought it could handle fish in the canal, guess not. :(
Why the hell do they cost so much if they have all these flaws?

Geez, guys my Scots heritage just won't allow me to spend 5-6hundred bucks on a reel. I'm getting 125-150 yards with 30# Fireline( well broken in ) from my Squidder. Looking for 200 , but lose my nerve putting that much back into it. That reel only cost me 35 bucks at the Wellfleet FleaMarket. Bought 3 others. Blow 'em out with Brake Cleaner, WD40 , and a little Penn Lube here and there ..don't go nuts. Wet the spool and Wizzzzzzzz!

Looks like it's time for anothe VS then. Thans for the input boys and girls.

! because sometimes the bait get trapped at that rock.....ahhhh nevermind. I'll show you this year.

Steal one off the MikeMan - won't even notice as long as its not engraved with a mermaid or something...

Yeh - tell me about it

Tattoo,

If distance is absolutely critical, the Emblem is your reel. I have one that I use, but very rarely. It's a third string reel. I put it on either an XRA 1322 or a 13'6" Rainshadow, both with Low Rider guides. I also use 30 lb PP for a bit more extra distance. It gets pulled out when the fish are way out and I'm throwin tin at them.

The Emblem is the only reel I have problems with bail closure on. I've done a lot of field testing on rod reel set ups and for my primary reels, the order for distance is Emblem first, then the Nautil, then VS. For most real fishing situations, the difference is negligable, but if distance is most important, the Emblem comes out, though it's not the reel I'd want when the "one" takes my plug.

If given the choice of reaching the fish and risking a blow up, or not reaching them with a winch of a reel, I'll take my chances after I reach them.

So,

What are some of the best long distance conventionals out there?...

Any recommendations?

Don,

ABU6500, but it's kind of on the small side and doesn't hold all that much line.

ABU7000 w/11'rod is the way to go for conventional.

Spinning, the jury is still out on that one.

Anyone know where I can find a good price on a ABU 7000CS ProRocket?...

Long Casting Conventionals
 

Some other longcasting conventional reels ot consider include the Penn 525 Mag and the Daiwa SHV or Grand Wave Series.

They are going to fill the void now that Abu has sold its soul to the bass fishing market.

Tom

don et al: THIS IS AN EXCELLENT BOARD. AND THIS IS MY FIRST POST.
first i must warn you i too am very new to this hobby/sport.
so i hate to do this to you guys during this fragile economy, i pray you will find room in your hearts to forgive me. there are two spinning reels that come highly recommended, that were not mentioned here, for casting long distance in the surf. they are the surf master by penn and the baitrunner by daiwa. albeit the emblem xt and the xa are excellent products. rumor has it the za even has a water proof drag for you VS lovers.
for those of you who plan to attend the sports show in plymouth this weekend check out Hatteras Jack booth. Ryan White the owner/operator is one of the finest long distance casters in the country. and on he** of a nice guy to boot. I do not owe him any more money so you can tell him I sent you.
for those not able to attend see www.hatterasoutfitters.com. tres (pronounced trey) he is another great source for long distance tackle.
so there you have it. good luck!
p.s. DO NOT MISS the long distance casting seminar by big daveon 4/12. If he is the same guy is saw cast at the Nationals in 2002 he is amazing!
if you do not have a second job to support this hobby, get one



:D :D