pulled it yesterday.
 

That's the bad news. The good news it is on blocks within 100' of my workshop. Hope to customize it a little more this winter.

I wish I had the skills and equipment RonnieRader has...I am still in awe over that door you guys did last winter.

Just finished covering mine. DEPRESSED!!!:bc:

just finished winterizing my 2 boats, engines today, all covered and put to sleep. Nice day to do it, usually I pick a friggin freezing wind swept day today was a beauty.

I'm trying to keep my ready-to-go for maybe another 2 weeks but forecast is making that look difficult. Would really like to find 1 nice day for tuna but might have to settle for 1 last tog trip.

winterized and covered last weekend, need to take a few more things off and stow them in the basement. another boating season in the books.
Time to put up the skating rink!!

Put mine in a barn last weekend . . . .
 

. . . to end my first boating season. Very sad but I sure welcomed the break. Now it's ice fishing season for me. I love the extreme changes in fishing we are offered here in the northeast. I can be at Block for Tuna, then fish a lake for pike, then fly fish the Farmington River for trout. Try that in Colorado.

Mine is all wrapped up. I look at it as a big christmas present I get to open up again in March!
Im happy the season is over. Wasnt the best year I've had fishing, need to regroup and come up with some new strategies.

Did the motor today, will cover Thursday after the bird while my son is here to help

putting my skiff away today, did the motor yesterday and put in the basement and wrap the boat today....come on spring:uhuh:.

All winterized and covered here. Just need to secure to cover a little better before the snow flies.

Yesterday was such a warm day I finally winterized it.

Mine is in line at Monahans to get winterized,then off to Metan to get the electronics reconfigured and a thru hull transducer installed.Could be for sale in the spring.

what chu got?

Parker 23 SE 2005, two foot itis after 1 season.

Mine is still ready to chase fish. Will haul out either this weekend or next
Posted from my iPhone/Mobile device

the SeaCraft is all done accept I still need to shrink wrap it. All Winterized, waxed and electronics removed.

The Engines in the Blackfin were taken out yesterday and should be on pallets ready to go away with thier new owner next week. The new engines should be here in about 30 days.

I'm actually waiting for the tide to come in a bit and will be pulling her out in a couple hours. Hoping to winterize the engine late this afternoon then I can clean and cover her tomorrow.

These are indeed sad, sad times.

Finally did pull it yesterday! Fuel is all topped off and treated. Needs a good wash down, warm/flush the engine with anit-freeze, put the treailer up on blocks, and then put the cover on. Time for a 3-4 month sleep.

Just had my last mission today in sweetwater. Ran some freshwater thru the engine and stopped to fish a bit as well. Caught 9 nice bass up to 4lbs. Egads, late March seems a long way away. I plan on putting her to bed on Saturday

Cover is on. All set for a long winter sleep.

Buzz, what kind of cover is that?
Will it really hold the weight of snow?
I have a cover similar that came with my boat but I don't think it will hold the snow weight in the bow. Yours looks like it's a little stronger.
Also, did you do anything special with top of T-Top (support) or just cover it?

Snow tends to slide right off. I wrap the outrigger bases in towels to prevent ripping but other than that the cover slides right over the T-top. There are 2 short poles with tennis balls that mount in the upper rod holders to also protect cover. I can put up or down by myself. Also the unit has zippers on either side to gain access to the inside.

Bought 3 years ago from:

Specialty boat covers, DEHT, DBT, TST, VST, Covers for Boats with Hard Tops T-Tops Boats with Ski Towers

Cover is made custom to fit the boat. If interested call the company don't try to order it via the website.

Thanks Buzz. I have the same exact cover custom for my boat. I was just worried the weight of snow might rip it.

When I had the seacraft, I tried several different covers, my friend who use to own a boatyard has the gun and stuff to do shrink wrapping. He told me he could make me a shrink wrap cover that would last multiple years and would keep the snow and ice off. I got 3 out of it and would have gotten more but I left it on too long in the spring and insects landed on it and birds came to peck at the insects and they shredded parts of it so I tossed it..but I got 3 years out of a cover that cost me 100 bucks. I had him come back and do my new boat this year. We built a simple (take apart) frame out of 5/4 pre-primed pine so I could have full headroom and open the engine hatch full, then shrink wrapped it with a zippered door in the stern. Instead of shrinking it to the hull all along the bottom like yards do, he folds over the ends inside and wraps a nylon belt all along the hull in the fold. This allows for loosing the belt in the spring to remove the wrap without cutting the plastic. Then in the fall you put up the frame and put the plastic back on, tighten the belt. It is not the prettiest set up but it works and he only charge me for materials (~ 200) so If I get a few years out of this that is sweet. I know of a guy with a regulator who got 5 and heard of someone who got 6 years out of one but I only got 3 out of the last one. I ordered some of that wide white tape so I can patch any holes should they occur. But now I have full headroom, power, and HEAT in there. I was thinking of subletting it to a few illegals but I don't want it messed up.:)

I went back and forth. Was going to leave my normal cover on a cross my fingers but I wussed out as I’m afraid the snow will damage it. Took the day today and made some supports and tossed a heavy duty tarp (20X30) I got at Ocean State on Black Friday for $40.

First Pic is my normal Cover I use “in season” to keep sun, rain and pine needles out.

Second Pic is supports. (I added an additional (removable) brace at the center of forward deck so the PVC would sag from snow weight.

Third Pic is with tarp on.
Tied ger down, jacked her up and now I wait for Spring……..

Well, i am going to the extreme. After buying the boat of my dreams, my wife is allowing me to build a garage to store it in. We had talked about a big garage for all my equipment. I have 15 acres so there are tractors, mowers attachments, brush cutters, etc.
We had the foundation dug this weekend 32 x 34. 14 foot high door for the boat and a 10 foot for the tractor, etc. Figure it's an investment adding to property value and, what the hell, that's why I am still working at 63 1/2. So I can afford stuff like this.
The down side is I will miss the pour today and some of the site prep as I flew yesterday (Sunday) for a week on the road in FL.

Awesome!!!!!!



Posted from my iPhone/Mobile device

Piemma,

That is the way to go no question... I have a friend who has a steel building on a slab. They block up his boat inside close the door and it's done. His has heat, lights and is 20+' wide so it has workbenches tools boat crap etc all inside. It is sweet. Best of luck with it!!

with Blackfish season closed they backed it into my garage this am. Now it's time for winter projects (although I'd still rather be fishing)
Happy Holidays

22' Sisu - On the trailer looking to replace or service aluminum fuel tank. New 115 x 4 Yamy installed so don't reply with anything but good stuff about my already purchased and installed engine. Funny at 17 years old I ran a 57ft scalloper and at 54 I am in a oversized nicely shaped tub. I love it