Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   Plug Building - Got Wood? (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=19)
-   -   Wood AYC (http://www.striped-bass.com/Stripertalk/showthread.php?t=91646)

ProfessorM 12-29-2016 08:27 PM

Wood AYC
 
Anyone have 2 1.5 x 1.5 square balusters 3 or 4 footers they can part with and somewhat close to Lakeville or the cape. I hate to drive all over for just 2 pieces. I have bigger stock but don't want to waste so much wood. Of course I will pay you. P.

Hookedagain 12-29-2016 08:45 PM

Paul, I have a chit load of one footers, i think they are drilled though. Does that work for you? If so I can meet up over the weekend (maybe Sunday morning)

ProfessorM 12-29-2016 09:56 PM

Unfortunately these will not be thru drilled. Screw eyes and have to be 1 foot minimum length. Thank you anyway. I appreciate the response. Happy new year.

pbadad 12-30-2016 07:35 AM

Paul I recently got a 100' order from Liberty cedar. They delivered it to Ct. For 25.00. If I was closer I gladly tighten you up. Also keep in mind I have plenty of birch which I could mill into sizes of choice. If Plugfest is on, I was going to post up if anyone needs some.

chefchris401 12-30-2016 08:29 AM

Paul I have what you need, but the pieces are already cut

Think the biggest ones are 16" and I know there's a bunch that are 12-14"

Let me know how many pieces and we can meet up, I'm in providence so it's not that far.
Posted from my iPhone/Mobile device

Slipknot 12-30-2016 09:01 AM

Quote:

Originally Posted by ProfessorM (Post 1114401)
Anyone have 2 1.5 x 1.5 square balusters 3 or 4 footers they can part with and somewhat close to Lakeville or the cape. I hate to drive all over for just 2 pieces. I have bigger stock but don't want to waste so much wood. Of course I will pay you. P.


you could have just called me and asked
I don't think you'd find it much closer to you
I have some

ProfessorM 12-30-2016 09:17 AM

Thank you. I did not even dawn me
Posted from my iPhone/Mobile device

ProfessorM 12-30-2016 09:18 AM

Quote:

Originally Posted by pbadad (Post 1114409)
Paul I recently got a 100' order from Liberty cedar. They delivered it to Ct. For 25.00. If I was closer I gladly tighten you up. Also keep in mind I have plenty of birch which I could mill into sizes of choice. If Plugfest is on, I was going to post up if anyone needs some.


Always looking for birch Bill. We will talk before plugfest
Posted from my iPhone/Mobile device

ProfessorM 12-30-2016 09:19 AM

Thanks guys Bruce is closest. I appreciate all the offers.
Posted from my iPhone/Mobile device

Swimmer 12-30-2016 01:08 PM

Ayc
 
Next time pm me. Would have brought it right over.

pbadad 12-31-2016 06:46 AM

Quote:

Originally Posted by ProfessorM (Post 1114417)
Always looking for birch Bill. We will talk before plugfest
Posted from my iPhone/Mobile device

Will do Paul. It's in 4' lengths, 8" wide x 5/4. I'll mill and cut to your requested size.

sks 01-11-2017 02:49 PM

Hey Guys, don't come by here as much as I should but I check in every now and then. I saw this and made me think. How short are some of you ayc pcs. I can use anything bigger than 5 or 5 1/2". I don't know if you find anything to do with your "end pcs". I hand carve my stuff and don't do a lot of plugs a year but if you have smallpcs kicking around I could use them in stead of tossing them out. Just a thought. I stillcome down and visit family in the Pembroke/Halifax area so I could pick them up. Again Just a thought. Maybe I'llsee ya guys somethime this season. Good luck. Scott


All times are GMT -5. The time now is 03:58 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com