Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   DIY - Forum (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=111)
-   -   Fencing on a hill? (http://www.striped-bass.com/Stripertalk/showthread.php?t=74653)

Bob Thomas 11-29-2011 03:28 PM

Fencing on a hill?
 
2 Attachment(s)
Ok...I'll try out the new forum!

I have been putting this off for too long and now the existing fence is ready to fall down. Rotted etc.

Question is this: Below, you can see the old fence. I want to put a new vinyl fence up instead of wood again. No maintenance is good for me! How do I install a vinyl fence on this slope? I've poked around and it looks I'd need to cut the fence down and "step" down the slope. Is there a way to do it like the existing one or am I hosed? It's a pretty steep grade. Want to hid the backyard from the road so people can't see how much of a mess it is ;)

Thanks!

UserRemoved1 11-29-2011 06:18 PM

your hosed

Karl F 11-29-2011 06:49 PM

hosed with vynyl, does not co-operate like those cedar panels do, cut and step, unless their is someone else here who can tell ya different.. like the low maintenence idea of the plastic, but the cedar still is my "cover" of choice.

striperman36 11-29-2011 06:50 PM

hosed.

Bob Thomas 11-29-2011 07:47 PM

Crap! I was afraid of that. I guess cedar will have to do. Thanks
Posted from my iPhone/Mobile device

Raven 11-29-2011 08:54 PM

what would it cost to pay someone to clean
the back yard as compared to a new fence

cedar or vinyl .... would be my next question.

Bob Thomas 11-29-2011 09:24 PM

No cleaning it Raven. It's the back of the shed where the yard waste goes for the year before the town yard waste opens. Plus a propane tank back there I want to hide. Needs a fence
Posted from my iPhone/Mobile device

O.D. Mike 11-29-2011 09:49 PM

Bob,
You could use Azek trim and cut the points yourself. You will need to power wash off the cut ends, mold will grow on the cuts ends. Use the same structure as the original fence and use stainless nails. You could probably biscuit them together or just use the Azek glue.

It can be pricey,

Just a thought.....

Or you could build a retaining wall and put a new vinyl fence straight across....

Raven 11-30-2011 05:30 AM

Quote:

Originally Posted by Bob Thomas (Post 904460)
No cleaning it Raven. It's the back of the shed where the yard waste goes for the year before the town yard waste opens. Plus a propane tank back there I want to hide. Needs a fence
Posted from my iPhone/Mobile device

figured you say that.... heh heh

PRBuzz 11-30-2011 06:07 AM

Go cedar, what do you get 15-20yrs, maybe 10-15yrs, vs infinity with vinyl....:uhuh:

UserRemoved1 11-30-2011 06:18 AM

Bob I'd go cedar. Plastic fence looks like #^&#^&#^&#^& imo.

I think the cedar would add more to the value of the house?

I have cedar on both sides of the house, and all down the back approx 190' and one side of the backyard is posts and 4' heavy steel wire so as to blend in and allow a nice view of the woods in the backyard.

Raven 11-30-2011 08:01 AM

more like a good view of the chipmunks approaching...-lol

if your garage side there was facing south ....

if it was me..i'd add a lean-to green house there

somethin like this.... just an IDEA

http://i25.photobucket.com/albums/c66/ravenob1/idea.png

Bob Thomas 11-30-2011 10:22 AM

Salty - It's only 2 panels and a gate. The fence stops where you see it in the pic. From the end of the fence towards the backyard (corner lot house) is just trees so I doubt I can add much to the value. Besides, the freaking town would probabl try to tax it on me ;)

Raven - I would LOVE to have a little greenhouse but the trees at the end of the house are too big and block the sun the majority of the time to that side of the house. Heck...I'd be happy if I could put in a garden too

UserRemoved1 11-30-2011 10:45 AM

EASY PEASY then Bob. Go down to homies and buy some cedar posts. Block them up with 2x4 and buy some fence sections, knock the pickets off and renail onto the hill. Take you less than a day to rip that out and redo, even rehanging the gate.

Let it weather for a bit then stain it.

It will outlive you.

O.D. Mike 11-30-2011 11:15 AM

Leave the 2 panels on the left and plant forsythia's in front staggering them so they will grow in full. When you can't see the fence, cut it down then all you will need is a vinyl gate.

shark lobster 12-18-2011 01:41 PM

bob fence has to be built ,, no matter cedar or plastic ,, vynal ,, the idea is custom cut each piece ,, if you need how too ,, pm me ill walk you threw it ,, very simple ,, but pricey

Bob Thomas 12-19-2011 01:09 AM

I was afraid of that Shark. Looked at that slanted panel and looked custom. Maybe plants are the way to go after all lol!
Posted from my iPhone/Mobile device


All times are GMT -5. The time now is 09:40 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com