Spray Booth questions
Where has anyone here bought a spray booth? Any recommendations.
|
They all seem over priced for what could easily be made. I just changed out of fans in mine as one of them died but it was my fault.
Posted from my iPhone/Mobile device |
build one frank. use pasche as a model, not hard at all. use a draft blower fan which you can isolate fumes if using anything flammable.
|
http://vent-works.com/blogs/the-vent...by-spray-booth
If I were to build another I'd build this. That blower is on eBay for $82 bucks. I've seen some nice set ups in totes as well. Posted from my iPhone/Mobile device |
I built one very similar to that design out of 1/2 plywood. Can whip that up in a jiffy, Frank. You just need to pick your dimensions. Let me know.
|
Thanks fellas
Posted from my iPhone/Mobile device |
Quote:
Posted from my iPhone/Mobile device |
I bought one years ago. Def build one and get a good fan. You will not be missing anything.
Posted from my iPhone/Mobile device |
The fan I've been using is from a Jenn air down draft stove. You can find them on Craigslist or ebay. You can get a control that changes the speed, I don't use the control though.
I do need to make a new booth. Thanks for sharing the vent works design Eskimo!!! |
this is the one I modeled mine after. http://www.usartsupply.com/PASBBF-3-...w#.VsByc4-cEu4
|
Don is that good for solvent based paints too, fan wise?
Posted from my iPhone/Mobile device |
Ordered Eskimo's motor suggestion. I have 1/2 plywood stock down cellar from a wood bin disassemble I did. Have to look around for metal stock??????
|
Make it out of plywood.....
|
Quote:
|
Thanks.
Posted from my iPhone/Mobile device |
All times are GMT -5. The time now is 07:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com