Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   Boat Fishing & Boating (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=24)
-   -   Operator error (http://www.striped-bass.com/Stripertalk/showthread.php?t=92898)

Guppy 10-11-2017 07:57 PM

Operator error
 
1 Attachment(s)
Looking for suggestions on how to fix....
Fill, sand, gel coat?
Attachment 64630

Clammer 10-11-2017 09:06 PM

WHAT IS IT /?????????

Nebe 10-11-2017 10:00 PM

If you can’t match the gel coat color, I’d fill with west system and medium density micro balloons so you can sand it somewhat easily. Then I’d scuff up the whole transom and paint it with a topside paint.
Posted from my iPhone/Mobile device

Raider Ronnie 10-12-2017 01:42 AM

Quote:

Originally Posted by Nebe (Post 1129779)
If you can’t match the gel coat color, I’d fill with west system and medium density micro balloons so you can sand it somewhat easily. Then I’d scuff up the whole transom and paint it with a topside paint.
Posted from my iPhone/Mobile device


Good advice.
Transom will probably look good when done.
What about the stb aft corner where the damage is 🤔
Posted from my iPhone/Mobile device

Raider Ronnie 10-12-2017 02:00 AM

Quote:

Originally Posted by Guppy (Post 1129770)
Looking for suggestions on how to fix....
Fill, sand, gel coat?
Attachment 64630

Looks to be plain white gel coat and lower stb corner so a blend not a big issue.
Sand area, rough up gouges with 60-80 grit, wash with acetone, fill with (looks to be just gel coat gouged, not glass) poly fare or other filler, 3 coats of gel coat, last coat sprayed mix 50/50 with duratech clear. Sand & buff.
1 day job for me.
You will need to redo the boot stripes also.
Posted from my iPhone/Mobile device

piemma 10-12-2017 03:31 AM

Ray, what the hell did you crash into????

wdmso 10-12-2017 03:32 AM

ouch and All those at once.. looks like I drove your boat

Rmarsh 10-12-2017 04:48 AM

Geez Ray that sucks...musta cursed a few good ones.
Easily fixed though as already advised.
Happen on the water or on the trailer?

Guppy 10-12-2017 06:18 AM

Stb aft corner....
Tied up to a float in river with tide and wind against me...
Hadn't noticed rub guard missing but not the mounting screws...
Once I took off couldn't stop or end up on rocks......
It sounded just like it looks... :-(

What day u free Ron... ;-)

Probably fill soon and finish warm weather next year....

JFigliuolo 10-12-2017 06:22 AM

Hardest part will be matching the color. If "pretty close" is good enough, that's no harder than repairing drywall. While Ronnie's advice is likely dead-on. You could easily fill sand repeat w/o needing to spray. I filled a nice "learning gauge" on my boat and i have a tough time finding it. To me... that's "pretty good".

One thing to remember, the gell coat ON your boat has likely faded a bit so don't be surprised if the repaired (and surrounding) area is a bit darker than the rest of the hull.

Slipknot 10-12-2017 09:00 AM

ya that is not going to buff out Ray

is that from a dock or multiple times on and off a trailer? Put a wheel on the dock corner or fix the guide posts of the trailer, then repair the damage so you don't operator error again

bloocrab 10-12-2017 10:19 AM

Leave it be....adds character

:jump:

Guppy 10-12-2017 05:58 PM

Quote:

Originally Posted by Slipknot (Post 1129817)
ya that is not going to buff out Ray

is that from a dock or multiple times on and off a trailer? Put a wheel on the dock corner or fix the guide posts of the trailer, then repair the damage so you don't operator error again

Bruce, see #9

Slipknot 10-12-2017 06:49 PM

I see now

Better luck next time
Posted from my iPhone/Mobile device

Raven 10-12-2017 06:58 PM

gup
 
i like plastic squeegees because the resin won't stick
to it and will peel or crack right off.

cat food cans make great little resin tins for hot batches
careful on the additive though
or you'll have it turn right to jelly
before your ready to parge it over the crack.

actually it's the same as screeding cement except you have
less time to get it right before it starts to set

you just mix in the hardener until you see either bubbles or
the batch starts to turn greenish

i love the smell of resin in the morning

nightfighter 10-12-2017 07:17 PM

Ray, see Ronnie's post. I thought two coats would do it, but it would take me a couple days... DA sander will make it shorter work compared to RO sander. (of course our contractors' compressors won't keep up, so you will need a larger supply tank) See if you can tint the filler white.... 's just a flesh wound....

fish raptor 10-13-2017 07:25 PM

Quote:

Originally Posted by Guppy (Post 1129794)
Stb aft corner....
Tied up to a float in river with tide and wind against me...
Hadn't noticed rub guard missing but not the mounting screws...
Once I took off couldn't stop or end up on rocks......
It sounded just like it looks... :-(

What day u free Ron... ;-)

Probably fill soon and finish warm weather next year....


Ray, remind me never to loan you my boat !!!! OUCH !!!!!

Guppy 10-14-2017 04:20 AM

Quote:

Originally Posted by fish raptor (Post 1129945)
Ray, remind me never to loan you my boat !!!! OUCH !!!!!

Never loan me your boat

Guppy 07-28-2018 11:39 AM

1 Attachment(s)
Grrrrrr
First round of gel coat never hardened,,,
Had to scrape/clean it all offa d start over...
The hardner that came with the gel was junk,,, too old? :huh:
Picked up a new tube and gel went off like a rocket in this heat....

This is it for now... going fishing.... :humpty:

Attachment 65477

niko 07-28-2018 06:03 PM

did the same thing first go around, live and learn

Sea Dangles 07-28-2018 07:29 PM

Guys, be more careful.
Posted from my iPhone/Mobile device

Guppy 07-29-2018 01:26 AM

Quote:

Originally Posted by niko (Post 1147729)
did the same thing first go around, live and learn

That’s me,,, trial and error

Quote:

Originally Posted by Sea Dangles (Post 1147730)
Guys, be more careful.
Posted from my iPhone/Mobile device

That’s no fun

Guppy 08-03-2018 06:37 PM

2 Attachment(s)
Lost count of how many coats to fill the deep ones....
Looking close I can still see some swirl marks here and there...
Good enough for now, lot of work to it!
Attachment 65491
Attachment 65492

beamie 08-03-2018 08:47 PM

I think that looks great guppy.

Seems a better color match in 1 pic than the other?

Sea Dangles 08-04-2018 12:24 AM

Nice
Posted from my iPhone/Mobile device


All times are GMT -5. The time now is 07:37 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com