Old problem ..
 

I have never had a problem with epoxy not hardening properly, but this is a first. I coated a special plug with enviro tex and it remains soft and slightly sticky to the touch. I probably had a s@#$y mixture and it caused the problem. I tried to cheap out and mixed a real small amount and I suspect the ratio was off.
Question is -- will a recoat solve the problem? Or should I simply wait it out? Anyone have this problem and solved it this way?:tm:

If it's a mixture issue waiting's not gonna help, it wont cure. Humidity can also play a role in the cure time but if it hasn't cured in a few days reapply and make sure you mix the etex up real well and as you know in equal parts.

If you warm it overnight near a light bulb and recoat the next day it should be fine.

I bet you are right - the humidity was off the scale when I coated the plug. I guess I will bite the bllit & recoat.

Karl - I heard a rumor that you are revising the single car ferry for Nauset access. aka Morris :hf1::hf1::hf1:

:D:DMemories................:bl::bl: