Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   DIY - Forum (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=111)
-   -   Source for Cedar planks? (http://www.striped-bass.com/Stripertalk/showthread.php?t=76158)

JamesJet 02-21-2012 02:17 PM

Source for Cedar planks?
 
Anyone out there know a good source for reasonably priced cedar planks? Looking to make a raised planter so rough cut would be fine. It might be the same price everywhere but for what I am dong seconds and or blemishes would be more than fine. I could change design based on what was available - right now I know they come in 2x6 or was looking at changing design to 1x6 or 1x8s and just add more support.

Hookedagain 02-21-2012 06:50 PM

Liberty Cedar? Also, check the local saw mills sometimes they have rough fence stock.

Rockfish9 02-22-2012 08:03 AM

give Moynahan lumber in Reading a call... I get my 4X4's there for plug building.. I know they have quite a bit of differant cedar in the racks.. I just go straight for the big stuff..

basswipe 02-23-2012 07:56 AM

Quote:

Originally Posted by Hookedagain (Post 922336)
Liberty Cedar? Also, check the local saw mills sometimes they have rough fence stock.

I was thinking Liberty too.

Northeast Millworks here in Tiverton might also be a place to give a call.

Jackbass 02-25-2012 03:08 PM

Liberty for sure. Rough hewn will save you some coin and they will deliver when they are in your area.
Posted from my iPhone/Mobile device

JamesJet 02-26-2012 10:19 PM

Thanks for all the suggestions guys, ended up with sorting through a pile of "pecky" cedar and found some great 2x12's for 1.99 a foot, topped it with some 1x4 cedar and found a almost straight 4x4 on deep discount for corner support. Git it all in Harwich at a place called StoneWood. Neat place some good clearance pricing. Now to fill it and start planting!

Tburg 02-29-2012 08:40 PM

They have a shop in Sandwich as well.. Used them for stone and block but have not checked out their wood quality.. May just have to .......

Hookedagain 03-01-2012 08:49 PM

North East Millwork (Peter Core) in Tiverton has a ton of lumber but.....VERY expensive. It may be a scrap piece but if you're interested.....he's going to charge you dearly.

JamesJet 03-01-2012 09:40 PM

1 Attachment(s)
well here it is, a few designs changes later, and about $50 worth of cedar I am pretty happy with the results. Corner posts have 12" of 4x4 underground The pipes to are not fastened in yet so the spacing is off, but wanted to see how it would lay out. Thats a new twist to lock in some thin pvc pipe frame for a bird net and or maybe even a plastic cover for early plating.


All times are GMT -5. The time now is 07:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com