Adjustable Level
I'm going to hopefully work on a tackle compartment in my lean posting, I'd like to level it correctly but with the boat being in a slight angle, I'd need to measure everything from the deck up.
Does anyone know of a level than you can adjust to make level on angled conditions? I've read the old boat builders using something like this but can't seem to google up something. Suggestions? |
Make one, should take about 5 minutes.
|
Quote:
|
you mean like a digital level?
|
Don't know Bruce just know the boat is beam and length on an angle and need to accommodate that when building
Posted from my iPhone/Mobile device |
String level side to side, and fore and aft. Measure differentials off deck and pull new strings.
Any chance of jacking the trailer closer to level? How'd we miss connecting yesterday? Or had you forgotten to bring the fence?:rotf2: |
Can't you just level the boat?
Or measure up evenly off the deck Posted from my iPhone/Mobile device |
cheaper to level the trailer and boat fore and aft.
Digital Laser Level/Angle Finder, Adj Arm - Electronic and Laser Leveling Kits - Measuring and Layout Tools - 1TLH7 : Grainger Industrial Supply |
Quote:
Posted from my iPhone/Mobile device |
If the boat is at an angle and the leaning post is attached to the boat at the same angle , then the tackle compartment needs to be at that angle..
In other words use a tape measure to measure from the top of the compartment to the top of the leaning post and use the same reveal on both ends. |
Quote:
-spence |
Quote:
Posted from my iPhone/Mobile device |
All times are GMT -5. The time now is 08:05 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com