Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   StriperTalk! (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=12)
-   -   Forum Speed (http://www.striped-bass.com/Stripertalk/showthread.php?t=11457)

JohnR 12-09-2003 12:31 PM

Forum Speed
 
My home interent service is running pretty slow so I can't tell properly how the board is running. Does it seem slower? Faster? The same?

Thanks

Jimbo 12-09-2003 12:33 PM

John, I'm running thru the corporate internet here at work, but it's smokin' like usual. Not seeing any delays.

rwilhelm 12-09-2003 12:36 PM

Seems to be running fast like usual using DSL at work.

chris L 12-09-2003 12:36 PM

looking fine to me . same same

Slipknot 12-09-2003 01:12 PM

A little slower here on cable hookup

Karl F 12-09-2003 01:26 PM

I gotta second what Slip said, seems slower on the comcast today, than usual.

179 12-09-2003 01:37 PM

John,
It seems the same here....no problems at all.

Saltheart 12-09-2003 02:36 PM

Good here

HESH2 12-09-2003 02:38 PM

GOOD HERE ON PHONE LINE

The Dad Fisherman 12-09-2003 03:22 PM

I seem to be experiencing a Packet latency rate of 2.467 +/- 200msec on all packets with a frame size <500kb above the Optimal range of 1.44mbps





Actually it seems Fine...no problems here

fishaholic18 12-09-2003 03:31 PM

Fast as usual for me on dial up.

UserRemoved1 12-09-2003 03:32 PM

I think the gidifrickulating widgalump is out of tweak?

Moose Nuckle 12-09-2003 03:35 PM

My Gleeping Glepor is a full speed. No Problems!

JohnR 12-09-2003 03:38 PM

A "framastatic gasket" ....

UserRemoved1 12-09-2003 03:40 PM

that's PART of the assembly :laughs:

Quote:

Originally posted by JohnR
A "framastatic gasket" ....

JohnR 12-09-2003 03:44 PM

Salty - I forgot to tell you that when I was at your house a month ago, I thought I saw bumper fluid leaking from the finnegan pin on the Quig

Christian 12-09-2003 03:45 PM

fast

UserRemoved1 12-09-2003 03:54 PM

yea must be that damn brick wall that got in the way when I was backing up....effer cost me $500 to replace..... :af: :af:

I did top off the fluid though don't seem to be leakin now....


Quote:

Originally posted by JohnR
Salty - I forgot to tell you that when I was at your house a month ago, I thought I saw bumper fluid leaking from the finnegan pin on the Quig

macojoe 12-10-2003 12:12 AM

seems to be about the same it has always been here! I have comcast


All times are GMT -5. The time now is 02:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com