Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   The Scuppers (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=22)
-   -   Pre-Fabricated Workbenches? (http://www.striped-bass.com/Stripertalk/showthread.php?t=12684)

fishweewee 02-06-2004 07:05 PM

Pre-Fabricated Workbenches?
 
Got kicked out of the kitchen.

Need sturdy work bench. Preferably wood or particlboard/corian. Can't have static.

Anyone know if say, Home Depot makes 'em or some other place?

Need a sturdy work bench to park some specialized tools (say, 22 x 54 inches), a shelf would be nice too.

Top needs to be beefy - enough to hold a 10 lb. cast iron gizmo thingy bolted to it.

Don't have time to make my own...

Thanks...

-WW

chris L 02-06-2004 07:10 PM

get some frakin wood and Ill help you build a decent bench . or maybe the wood talented slipknot could help . I need 3 too for my new basement .

fishweewee 02-06-2004 07:11 PM

Chris, thanks for offering, wouldn't wanna put you out like that.

chris L 02-06-2004 07:12 PM

out like what ?

fishweewee 02-06-2004 08:16 PM

Out of the CLOSET, silly! :laughs:

I know I know...I'll stop, can't get this gay crap out of my head.

chris L 02-06-2004 08:21 PM

well as long as you dont act on it . you should be ok .

Nebe 02-06-2004 11:14 PM

I picked up a nice table from sears. its got roller bearring drawers and a particle board top. cheap too if I remember right.

fishweewee 02-06-2004 11:18 PM

Quote:

Originally posted by Eben
I picked up a nice table from sears. its got roller bearring drawers and a particle board top. cheap too if I remember right.
Thanks buddy, found a perfect one. Will make a trip tomorrow...

-B

chris L 02-07-2004 08:07 AM

so what did you find ? and where ?

fishweewee 02-07-2004 08:33 AM

Chris, so a search for "work benches" at Sears.com (under tools heading).

Yowsa, some of this stuff is expensive!

Found something cheaper at Lowes.com - (under $100). Might take a trip to Orange.

-B

capesams 02-07-2004 08:36 AM

r u afraid ya power is going to blow up:hihi:

nightfighter 02-07-2004 08:48 AM

FWW,

Don't remember prices, but search through Rockler.com. I use the site for specialty tools from time to time.

fishweewee 02-07-2004 08:50 AM

Quote:

Originally posted by capesams
r u afraid ya power is going to blow up:hihi:
SSSHHHHHHHHHHHH!

capesams 02-07-2004 09:14 AM

ok..I won't tell the guy's how messy cake mix can get....

fishweewee 02-07-2004 09:19 AM

U should see these "cakes," Steve. :hihi:

Jenn 02-07-2004 10:32 AM

wee wee I dont know if its too late or it will suit your needs but hubby picked up a wood bench at home depot for $50 and he had it together in about a half hour.

fishweewee 02-07-2004 01:33 PM

Jenn, thanks, I'll look into it. Not all Home Depot stores carry the same things but I'll take a peek!

-B

Karl F 02-07-2004 01:57 PM

Static?
 
NO static, No static, No Static at ALLLLL..... FMmmmm, No static at all... ;)



BOOM :eek:

:laughs:


I've been inhaling paint, dust, and bleach fumes all week, thinks it's taking it's toll :rolleyes:

fishweewee 02-07-2004 02:01 PM

I have too many weird hobbies :wall:

Fishpart 02-07-2004 05:26 PM

weewee if you are that worried connect a wire fron the bench to a ground rod..............or water pipe

fishweewee 02-07-2004 08:23 PM

Yeah, planning on doing that, Ed.

MAC 02-07-2004 09:41 PM

Ben, what are ya mixing; charcoal, sulphur and sodium nitrate:D

mikecc 02-07-2004 10:07 PM

sounds like someone is reloading.:rocketem:

Raven 02-08-2004 06:07 AM

static
 
you can generate a static charge just from running your hand through your hair... so the rule of thumb is to always keep one hand grounded when possible.....if not in use. perhaps wee wee is making those special bluefish treats that have fuses :laughs:

fishweewee 02-08-2004 10:03 AM

Quote:

Originally posted by mikecc
sounds like someone is reloading.:rocketem:

SSSSSHHHHHHH!

Mr. Sandman 02-09-2004 09:14 AM

Get one of those sweet benches from GarrettWade.


All times are GMT -5. The time now is 03:56 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com