Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   The Scuppers (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=22)
-   -   Just have to vent. (http://www.striped-bass.com/Stripertalk/showthread.php?t=13814)

mikecc 03-25-2004 11:15 AM

Just have to vent.
 
I am in the process of building a new kitchen for about 4 weeks now. we ordered the counter tops 3 weeks ago. I built all the cabinets to standard measurements and we included a corner sink unit and I must say it looks great. I gave them all the measurements and blueprints of the areas. So we get the counter tops in today and they srcewed them up and had to take them back.another 3 weeks of waiting :af:

MrsSFrances 03-25-2004 12:18 PM

:mad: that sucks!!!:af:

BigFish 03-25-2004 01:04 PM

Just goes to show you MikeCC...."you can't counter on anyone these days". :laugha: :hihi: :jester: :jump1: Sometimes if you don't laugh at life....it is just gonna laugh at you!:happy:

Raven 03-25-2004 07:36 PM

next time
 
give them a template made out of cardboard from a refridgerator

called in the trades a story board ..... which tells the story.
if possible that is... waitin sucks.... i'm sure

mikecc 03-25-2004 10:37 PM

one thing good that happened was I ordered a lazy susan for the upper cabinet. order arrived today and they shipped 2 & only charged me for 1:D


Quote:

give them a template made out of cardboard from a refridgerator
Raven
a corner unit is 36" and they are 24" deep no matter how you try to do it you get the same measurement. I don't know how they screwed that up.

capesams 03-26-2004 10:46 PM

" just have to vent" got no window in that bathroom?

Goose 03-27-2004 09:38 AM

That stinks Mike

Don't stress now Bloo....look what ya got to look forward too.

Bawana 03-27-2004 10:42 AM

hope they at least gave you something to put on top to used for now---I had a place on 27 in Hanson come and do and they use plywood to make top not partical board and then laminate and bevel edges. Excellent work! came and measured for angles and lengths returned 3 weeks later and removed the old 50*s counter top with the metal edge dropped new one on with sink cut out done even made matching top for portable dish washer.In and out in a couple of hours .They were great.I forget how I heard about them but would recomend to anyone.


All times are GMT -5. The time now is 05:02 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com