Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   StriperTalk! (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=12)
-   -   Shimano Reel Parts (http://www.striped-bass.com/Stripertalk/showthread.php?t=17394)

redlite 08-25-2004 09:47 AM

Shimano Reel Parts
 
Finally need to replace a part on my Shimano Stradic.
Any where around the Quincy area that I can PICK-UP drag washers for a Stradic 8000 FH? Cooked mine out in a year and it cracked. I know Bucko's in Fall River is the "area" repair place, but I don't have time to get down there when they are open and can't fish until I get it.
HELP!!!!!

basswipe 08-25-2004 11:11 AM

I know that you can order them from Bucko's in Fall River.He carries tons of parts.He will mail them to you.

www.buckosparts.com

Rappin Mikey 08-25-2004 11:13 AM

You can order directly from Shimano but don't expect your parts until 10 days from now. I just ordered a new drive and pinion gear for my BTR 6500. Let me know I have the #'s at home.

Fishpart 08-25-2004 11:30 AM

Bucko's will ship to your door in a couple of days if they are in stock...

Rappin Mikey 08-25-2004 11:36 AM

I actually need one of those little tiny clips that hold your shaft in place. They are like a few mm long (very small). I don't want to pay shipping and handeling for 1 cent part. Anybody have any ideas?

partsjay 08-25-2004 11:45 AM

I'm not sure but try Mike @ M & D's ( cape cod tackle ). I know he has reels there but not sure if he has parts. Right on the way to the Cape.

redlite 08-25-2004 11:48 AM

Mikey,
My thoughts were the same- Didn't want to have to pay more for shippin and grabbin than I did for the part itself.

STEVE IN MASS 08-25-2004 12:24 PM

What's worse is they charge you $3.50 or more for shipping and handling, and then put the small parts in an envelope with a $0.37 stamp on it.......been there, done that......

Only thing I can suggest is get an inventory of any parts for all your reels that you may need in the next few years, and order them all at once....at least that offsets the shipping cost a bit. Think ahead......screws for the cover plates corrode, drag washers, bearings, bail springs, line rollers, etc.....

STEVE IN MASS 08-25-2004 12:28 PM

Mikey.....is that clip for the Baitrunner? If so, did you lose it, break it, or is it just bent (I've seen them just bend)? If it is just bent, you can straighten it out with a pair of needlenose pliers, and it will work fine for the interim until you can get a new one.....

Rappin Mikey 08-25-2004 01:06 PM

Lost it. The thing is so small I think it is somewhere stuck in the greese inside the reel.

redlite 08-25-2004 02:56 PM

Ordered the part(s). 25 beans:af: 2 days shipping.
Can't wait to cook em out on some reel fish.

basswipe 08-25-2004 05:15 PM

Quote:

Originally posted by Rappin Mikey
I actually need one of those little tiny clips that hold your shaft in place. They are like a few mm long (very small). I don't want to pay shipping and handeling for 1 cent part. Anybody have any ideas?
Its a Shimano.....no such thing as a 1cent part.Bucko's is reasonable.


All times are GMT -5. The time now is 01:13 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com