Name this lathe part
 

Hi;


I have an old Central Machining Lathe.
It is sold by Harbour Frieght.
I need to replace the part in the attached picture.
Sorry for the picture quality.
You'll love this.......
I don't know what the name of the part is.
I would guess it is a chuck, but after searching
the web, all I have found is adjustable chucks.
I have managed to break off all 4 of the parts
that would hold the wood still.
Makes it hard to turn when the wood turns also.

Any help will be appreciated.

Thanks
Surfrod

It looks like a "drive spur"
Can't really see it all that well.

I have a 36066 Central Machinery lathe and the part looks identical to mine. If so its part no. 8 drive spur. Let me know if you need an adress or phone # for them.

Thanks Salty and sea-5 for the reply.

And to The Geek;
Yes I would like the address or phone number of where I
can get it.

I searched the web again looking for it but no luck so far.

Thanks again guys........

Surfrod

My manual says 3491 Mission Oaks Blvd. Camarillo, Ca. For tech questions and parts 1-800-444-3353.