primer
 

After I seal my plugs, what kind of primer do you guys reccomend? I work at a hardware store and have access to binz cover stain. but what do you guys use thanks chuck

zinnser...cover stain,,primer sealer .stain-kill,, bond coat ,,,in the spray can ...white and gold rattle can ..

can you air brush createx over all that different primmer that tagger mentioned I have a few plugs I spun and was just wondering thanks John:happy: :happy:

Yes..createx,,rattle cans...

:rolleyes: Thanks Tagger u guys on this site are great .....I can get started on my next phase ........

I like to use rust-o-leam sandable primer, it gives me a nice - flat finish. i do one light coat, scuff with grey scotch-brite, then give it the second coat. They come out looking great!

I've tried (red) bin spary can and didn't like it, the spray came out and put a fuzzy texture the plug that needed alot of sanding. Is that normal with the bin sprays?

No Red . I've never had a problem with the zinnser I'm using .. So i've never switched ..