Drill chuck--
 

Has anyone found a driil chuck that will fit the tailstock of a Jet Mini?
Thanks.

Go to WTTools.com You want one with a #2 MT About 10 bux for the chuck and taper adapter

http://www.pennstateind.com/
or Ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll...category=25292

I just ordered one of these sears lathe takes #1 morse taper ..my delta takes #2...http://www.packardwoodworks.com/Merc...Category_Code=

Geez thanks guys:hihi: I got more info from you in 2 hours then i got in 2 days calling the company:D Should have come to "the source" in the first place.:)

The MT2 can be used in the head or tail stock of the Jet.

Jigman

Go to sears and bucks -- they have the chuck with a # 2 taper that will fit. I actually have two and sometimes use the second one in my tailstock to salvage plugs that I have cut the end off prematurely. A 1/8 " drill chucked up and fit into the hole acts as a center even with cupped plugs and I can drill or finish as I need to. :jump: :jump:

Most important info yet!!! :kewl:

Thanks for all the good info.:btu: