tube n worm
 

I've been tube n wormin from my yak without great success (few shorts). My question is about how much line should you have out when trolling in 20 to 40'??? Thanks Mike

Thats real deep without wire. For wire it's 100ft of line to get 10ft deep, with mono and braid you'll need a big trolling weight but trial and error is all I can suggest, start with an ounce and keep working up. No luck trolling < 10ft depths?

i tube and worm in 6' to 15'. anything over that i use parachutes/pork rinds on wire but you can parachute with lead too.
either way,, you want it right off the bottom.

Mike,
What are you using for line?
lead core, wire, braid,mono ?

Mike, I made up some tubes with a 2 oz smilin bill head for drifting they work well. just drop it till it hits bottom then crank it in a turn or two.

Mike,

Some of my freinds have switched to tubing with braid instead of leadcore. The braid is so damn thin, and leadcore is fat, that the braid has been getting down better than the lead. These are freinds who will tube the deep waters North of Billingsgate in 40 to 60 ft.

I use the braid but I 3 way the tubes with a bucktail. Saw this in Carloina this winter... The Carlonia rig...

I'm using braid. Thanks for the tips guys. I've been using a 1 to 2 oz sinker. I guess I'll keep experimenting till I find what works.

Mikey ,you must be RIPPED makeing that YAK move @ trolling speed, stay out of P -Town around 4 pm thats when the tea time is, there looking for a bald strong man that smells like fish, be warned or have nightmares forever.
link sr :cool:

drag it in the sand.row row row at least 2 knots. :bounce: wire is old school. get it .

Link U is funny!! :humpty:

Mikey do you have a rudder on the tnw?