tuesday night pogey paint
 

i'm in the cave, and i got wood to paint.

here's a bunch o' pics.






start with black.
smooth,,,, like salty's head.

mask it off nice and tight with toole'

white, down the belly.
silver, down a little lower..... don't cover the white.

gold, down the side.don't clean the gun you'll need that same gold.


lets see what we did?

flip it over and re-mask with toole' nice and tight.


same gold on top.

add a little bit of black, to the gold, for the top.


then clearcoat.

i put a little bit of blue, and a little bit of purple pearl in the clear.



that's how you get the scale pattern to go all the way arround the plug :buds:

An Awesome thread TFF.:btu: Thanks for sharing that. :D

Thanks for the treat! Awsome job as usual. :lm: :lm:

Great colors and effect, thanks for sharing.

Pearl this freakboy

I can't wait to take you out on the boat :devil:

incredible TFF

How do you get the 'seam' so tight, does that just come with practice?

When you are spraying the second half, how do you keep overspray from getting on the first half you just sprayed?

i don't try to line up the seam at all.
just start with the same color when you flip it over.
if you look real close you can see where they meet. probly because the toole' i use is very small. and every angle you hold it your looking at a different color.
that, plus the glitter in the clear makes for too much to focus on at one time so it fools the eye a little.

the angle you hold the spray gun will not let the paint on top get on the bottom. i tried to get the spray gun in the pics just for that reason, the spray angle.

every one i've given/swapped, it gets the same response?
"how do you get the scale to go all the way arroud"??

paint
 

wow, excellent color :ss:

TFF unbelievable work. :kewl:I know you believe in bonding quickly between

paint coats, but how long do you wait before clear coating?

maybe 15 minutes. just enough time for the base coat to flash off{touchable}.
that plug was black, to clear in about 1/2 hour.

if your gonna spin it with thick clear like e-tex i'd wait a little longer maybe an hour. so the colors don't sag. or maybe a light coat of rattle can clear to lock everything in place beforehand?
sem makes some nice rattle can clear thats uv proof and hardens up nice.

What is SEM

sorry my mistake.....
not sem rattle can.

u-pol rattle can clear.
we use it to cheat in the shop. inside of doors, fender edges that need a good shine over the basecoat without having to mix a batch of eurethane.

maybe i'll bring a case or two to plug night.

WOW. Beautiful job.

Thanks for the post.:hihi: Cool stuff. :kewl:

:drool:
that will cover me :D :hidin:

Killer paint freak. Appreciate you sharing :kewl:

Jigman

all done....
little black round the eye, some more pearl in the clear, and a few mac spots here and there.

now,,
if i only had some hooks and split rings :read: :walk: