Drilling
 

Eyes:
I will be using a Forstner Type Wood bit:
http://www.myfishpix.com/gallery/dat...Drill_bits.jpg

What bits do I need for the rest of the possess types, sizes and lengths. Thanks in advance

Sorry for all the question

Bradpoint bits in what ever sizes you need. A couple extra long parabolic drills in 1/8" and 3/16" for through drilling. A good set of jobbers drills for general use.
A few good rotary files for cupping poppers 3/4, 1.000 and 1.250.
Be safe have fun.