steelhead-
 

your PM's are full, but here the pic.

http://www.striped-bass.com/Stripert...3&d=1115930318

Cleaned house. Have you ever swum the little devil?

not that one. but the flaptail i just made kicks up a roostertail :cheers:

I made/copied a flaptail very similar to the one in the bottom of that picture (probably the same plug but I can't see the nose to be sure, the one I copied had a little cove on top of the head like a pikie only smaller). I turned it out of birch, which was what the original seemed to be, but it has been a disappointment. It hasn't fished well and has less action than those models with a wider head and narrower tail. It also floats too low in the water. If you copy that one, I'd use a more bouyant wood. I've also found that flaptails work better when the front eye and spinner connection are both off center.

Come on Nebe. Picture time. Don't tease :-)

ya really,, what are you up to:boots:


SHOW US THE PLUGS !

top secret,
but here is one kinda like the rooster tail throwing one :D

http://www.striped-bass.com/Stripert...0&d=1137461305


numbskull, i agree with your thoughts.

I second Nebe. Your thoughts are right on, Numbskull...

i get one :thanks:

old school paint job :btu: