Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   The Scuppers (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=22)
-   -   Need an electrician in RI (http://www.striped-bass.com/Stripertalk/showthread.php?t=30857)

spence 04-19-2006 12:27 PM

Need an electrician in RI
 
I'm in need of a service upgrade, new panel etc...should be a standard job...located in Tiverton, RI.

If anyone can suggest an electrician to do the job please let me know.

thanks,

-spence

Nebe 04-19-2006 12:29 PM

If you got a decent fire extinguisher i will do it for free:hihi:

Sea Dangles 04-19-2006 03:13 PM

Do you know Howard Jablowme,he's a member of this site.

spence 04-19-2006 03:58 PM

Quote:

Originally Posted by Sea Dangles
Do you know Howard Jablowme,he's a member of this site.

He must be your fishing partner :humpty:

-spence

tattoobob 04-19-2006 04:56 PM

A upgrade from 100 to 200 amps should run you about $2,000.00

spence 04-19-2006 05:26 PM

Today we're at 60 :gf:

-spence

tattoobob 04-19-2006 05:33 PM

so what are you up grading to ? may as well go all the way

spence 04-19-2006 06:55 PM

Probably 200, I don't think there's that much of a cost difference to do anything that much lower.

Although we don't need that much more juice. I'm sure there are some circuits that could be spread out, and I'd like to add a few external circuits with GFCI breakers for the deck and soon-to-be water feature...

-spence

tattoobob 04-19-2006 08:09 PM

I am up grading from 100 to 200 amps and splitting a few that are over loaded. I can't make coffee and toast at the same time. I also have some breakers that are 2 in 1 and always trip. Good luck, I have a friend and I am paying him 200 plus parts. He isn't lic. in RI though

spence 04-19-2006 08:12 PM

Over 1/2 of our box are splits!

Last fall a neighbor, who's an elec teacher quoted about 1200 to go to 150. Could be a decent price...I've not yet got other quotes as we killed the project until the new year.

-spence

tattoobob 04-19-2006 08:14 PM

Sounds like a good price to me, but get other prices just to keep him honest

spence 04-19-2006 08:19 PM

Quote:

Originally Posted by tattoobob
Sounds like a good price to me, but get other prices just to keep him honest

I will for sure...

But to be honest...I don't trust anyone. No offence to the contractors out there :hee:

-spence

Vectorfisher 04-19-2006 08:24 PM

Your quote of $ 1500.00 seems very fair , but he is robbing himself as the material for a 150 A service actually costs more than the stock for a 200 as it is pretty uncommon to go with 150 A You might want to make sure who is doing the work has at least liability insurance, pulling a permit is usually a good idea

spence 04-19-2006 08:29 PM

I wouldn't do it any other way...

The person in question is insured, licensed and a teacher at a local tech school. It's possible that material cost has gone up in the last year...

I wouldn't do it without a permit...actually would the elec company do the work on their end without one?

-spence

tattoobob 04-19-2006 08:48 PM

The Electric Co. doesn't need a permit,A permit is for only for work inside your home.

ThrowingTimber 04-20-2006 12:56 PM

Get in touch with BlackEye


All times are GMT -5. The time now is 04:07 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com